SM-SP-40 Ubiquiti SunMAX Solar Point

The SunMAX SolarPoint is a remotely managed MPPT 24V 7A charging appliance with a built-in, four-port, 24V PoE, 10/100Mbps switch and one DC output that delivers up to 40W. It comes with built-in weather prediction service, which together with AI algorithms will provide you with critical information about your solar site's existing and future performance.

Specifications

• Dimensions - 202 x 186 x 50 mm (7.95 x 7.32 x 1.97")
• Weight - 650 g (1.43 lb)
• Enclosure Characteristics - UV-Resistant Polycarbonate, Outdoor Use
• Max. Power Consumption - 2W
• Networking Interface - (4) 10/100 Fast Ethernet Ports
• Management Interface - Ethernet Wi-Fi (2.4 GHz)
• Button - Reset
• LEDs - System, Output
• Power Source - PV Panel (H4 Connectors)
• PV Input Voltage Range - 10 - 60V, (Reverse Protection, Surge Protection), Maximum Open Circuit Voltage 60V
• PV Maximum Current - 10A
• PV Power Control - MPPT
• Output Interfaces - 24VDC Passive PoE (Pins 4, 5+; 7, 8-) 24VDC Terminal Block
• Output Voltage - Battery Voltage Limited to 24V (Surge Protection)
• Maximum Power Output - PoE: 17W, DC Out: 24W, Total: 40W Max
• Battery Type - 24V SLA, AGM, Gel lead battery
• Absorption Voltage Steps - 27.4V, 28.2V, 29.1V, 30V
• Float Charge Voltage - 95% of Absorption Voltage
• Max. Charge Current - 7A
• Under Voltage Protection - 22 – 23.6V Software Configurable, 22V Hardware Protection, Two Priority Levels for Output Disable
• Operating Temperature* - -20 to 50° C (-4 to 122° F)
• Operating Humidity - IPx4
• Certifications - FCC, IC, CE
• *Stops charging when limit exceeded and restarts charging with 5° C (9° F) hysteresis