AL1024NK8D Altronix 8 PTC 6Amp 24VDC or 6Amp 12VDC Dual Output Power Supply in UL Listed NEMA 1 Indoor 12” W x 15.5” H x 4.5” D Steel Electrical Enclosure – Gray

Altronix AL1024NK8D converts a 115VAC 60Hz input into eight (8) PTC protected 12VDC or 24VDC outputs with a total of 10A max. Dual input design allows power to be steered from two (2) factory installed independent low voltage 12 or 24VDC Altronix power supplies to eight (8) independently controlled PTC protected outputs.

Specifications

Power Supply (AL1024ULXB2)

Input

• Voltage - 115VAC 60Hz, 4.2A max
• Fusing - 5A/250V

Outputs

• Voltage - 24VDC
• Current - 10A @ 24VDC continuous max
• Other - Overvoltage protection, Filtered and regulated

Back-up Battery

• Capacity - 12AH /12VDC (2 within enclosure), 40 AH / 65 AH (requires separate enclosure)
• Type - Sealed lead acid or gel type
• Failover - Upon AC loss, instantaneous

Supervision

• AC Failure - Form “C” contacts
• Battery - Form “C” contacts

Indicators (LED)

• Input - 115VAC is present
• DC Output - Powered
• Battery - Discharged or not connected

Dual Input Power Distribution Module (PDS8CB)

Input

• Voltage - 24VDC from AL1024ULXB2 and 12VDC or 5VDC from VR6
• Input PTCs - 9A

Outputs

• Voltage - 12 or 24VDC individually selectable
• Any of the eight (8) PTC protected power outputs are selectable to follow power Input 1 or Input 2
• Individual outputs may be set to OFF position for servicing
• Output PTCs - 2.5A

Indicators (LED)

• Out1 - Out8 - Bi-colored LEDs indicate 12 or 24VDC

Voltage Regulator (VR6)

Input

• Voltage - 24VDC from AL1024ULXB2

Output

• Voltage - 12VDC
• Current - 6A continuous
• Other - Surge suppression

Indicators (LED)

• Input - 24VDC is present
• Output - Powered

Agency Listings

• CE - European Conformity
• All components of this kit are UL Listed sub-assemblies
• Please refer to the corresponding Sub-Assembly Installation Guides for further information

Physical and Environmental

• Dimensions (H x W x D) - 15.5” x 12” x 4.5” (393.7mm x 304.8mm x 114.3mm). Enclosure accommodates up to two (2) 12AH/12VDC batteries
• Product Weight - 9.4 lb. (4.26 kg)
• Shipping Weight - 10.5 lb. (4.76 kg)
• Operating Temperature - 0ºC to 49ºC (32ºF to 120ºF)
• Storage Temperature - -20ºC to 70ºC (-4ºF to 158ºF)
• Relative Humidity - 85% +/-5%
• BTU/Hr. (approx.) - 123 BTU/Hr

AL1024NK8D Specifications Sheet

AL1024NK8D Installation Manual