AL1024NK8DQP Altronix 8 PTC 6Amp 24VDC or 6Amp 12VDC Networked Dual Voltage Power Supply in UL Listed NEMA 1 Indoor 12” W x 15.5” H x 4.5” D Steel Electrical Enclosure – Gray

Altronix AL1024NK8DQP converts a 115VAC 60Hz input into eight (8) PTC protected power-limited outputs. Outputs are individually selectable, providing 12VDC or 5VDC up to 6A and/or 24VDC up to 10A (240W total power) for access control panels, door locks, and ancillary devices. Unit also offers a suite of features that includes overvoltage protection, AC fail supervision, low battery supervision and battery presence supervision. Networkable power distribution module facilitates monitoring, reporting, and control of the supervised DC power supply/charger over the network. It reports diagnostics via Email and Windows Dashboard Alert notifications, greatly reducing system downtime and eliminating unnecessary service calls.

Specifications

Power Supply (AL1024ULXB2)

Input

• Voltage - 115VAC 60Hz, 4.2A max
• Fusing - 5A/250V

Outputs

• Voltage - 24VDC
• Current - 10A @ 24VDC continuous max
• Other - Overvoltage protection, Filtered and regulated

Back-up Battery

• Capacity - 12AH /12VDC (2 within enclosure), 40 AH / 65 AH (requires separate enclosure)
• Type - Sealed lead acid or gel type
• Failover - Upon AC loss, instantaneous

Supervision

• AC Failure - Form “C” contacts
• Battery - Form “C” contacts

Indicators (LED)

• Input - 115VAC is present
• DC Output - Powered
• Battery - Discharged or not connected

Voltage Regulator (VR6)

Input

• Voltage - 24VDC from AL1024ULXB2

Output

• Voltage - 12VDC
• Current - 6A continuous
• Other - Surge suppression

Indicators (LED)

• Input - 24VDC is present
• Output - Powered

Network Power Distribution Module (LINQ8PDCB)

Input

• Voltage - 24VDC from AL1024ULXB2 and 12VDC from VR6
• Input Fuses - 15A/32V

Outputs

• Eight (8) PTC protected outputs rated 2A
• Power output(s) can be locally or remotely controlled
• Surge suppresion
• Output PTCs - 2A

Status Monitoring

• Power Supply output voltage and load Voltage and load of each output
• FACP trigger and reset status
• Unit temperature (Celsius)
• Power Supply AC and Battery status
• Battery health

Indicators (LED)

• Bat Local - Charging current status
• FACP - Triggered / Released
• Input - Input signal
• Out1 - Out8 - Bi-colored LEDs indicate 12 or 24VDC

Reporting

• Windows Dashboard Alert messages
• E-mail notifications
• Event Log tracks history

Programming Features

• Power Supply(ies) voltage and load limits (High/Low)
• FACP trigger type (wet or dry-N.O./N.C.)
• Input Function (FACP reset/tamper)
• Output Reset Trigger (N.O./N.C.)
• Battery Monitor Configuration: Battery condition (Low/Normal/Missing), Service Date
• Configurable Output Relay(s)
• Individual Output Configuration: Device ID, Voltage and Current Limits (High/Low), FACP Trigger Setting (latching/non-latching/inactive), Battery Backup

Fire Alarm Interface

• Supervised FACP disconnect (Latching or Non-Latching)
• FACP reset (N.C. or N.O.)

Agency Listings

• CE - European Conformity

Physical and Environmental

• Dimensions (H x W x D) - 15.5” x 12” x 4.5” (393.7mm x 304.8mm x 114.3mm). Enclosure accommodates up to two (2) 12AH/12VDC batteries
• Product Weight - 9.4 lb. (4.26 kg)
• Shipping Weight - 10.5 lb. (4.76 kg)
• Operating Temperature - 0ºC to 49ºC (32ºF to 120ºF)
• Storage Temperature - -20ºC to 70ºC (-4ºF to 158ºF)
• Relative Humidity - 85% +/-5%
• BTU/Hr. (approx.) - 123 BTU/Hr

AL1024NK8DQP Specifications Sheet

AL1024NK8DQP Installation Manual