NETWAY2ES Altronix PoE-Powered 2 Port PoE/PoE+ Switch

Altronix NetWay2ES PoE-powered 2 port PoE/PoE+ switch is designed for installation at the IDF (Intermediate Distribution Frame) to deploy IP devices. NetWay2ES allows for system expansion by accommodating up to two (2) IP cameras/devices over a single CAT5 or higher structured cable. PoE is passed from a midspan injector, typically located at the MDF (Main Distribution Frame).

Specifications

• Ethernet Input - 802.3bt PoE up to 90W or 802.3at up to 30W or 802.3af up to 15W
• Ethernet
  • 2-PoE+ ports, IEEE 802.3af and 802.3at compliant
  • Connectivity - RJ45, auto-crossover
  • Wire type - 4-pair CAT5e or better structured cable
  • Distance - up to 100m
  • Speed - 10/100BaseT, half/full duplex, auto negotiation

Indicators (LED)

• Yellow and Green LED (by RJ45 jack) - IP Link status, 10/100Base-T/active
• Green LED - Input/Output PoE on

Agency Listings

• CE - European Conformity

Physical and Environmental

• Dimensions (W x L x H) - 3.5” x 3.5” x 1” (88.89mm x 88.89mm x 25.4mm)

Weight (approx.)

• Product Weight - 0.25 lb. (0.11 kg)
• Shipping Weight - 0.42 lb. (0.19 kg)

Temperature

• Operating - -40ºC to 75ºC (-40ºF to 167ºF)
• Storage - -40ºC to 75ºC (-40ºF to 167ºF)
• Relative Humidity - 85% +/-5%
• Operating Altitude - -304.8 to 2,000m

NETWAY2ES Specifications Sheet

NETWAY2ES Installation Manual