FPV4-E2M/T4X LifeSafety Power ProWire XPRESS Mercury 4 Door 4 Amp 12VDC 3 Amp 24VDC Access Control Power Supply in UL Listed Indoor 16" W x 20" H x 4.5" D Electrical Enclosure

LifeSafety Power Single Voltage ProWire Xpress power systems offer integrators the highest level of value, performance and installation efficiency. Mercury models are factory wired for system power, RS485 communication, faults and tamper. Pre-installed standoffs simplify field installation of the Mercury controllers.

Specifications

Input Power

• 120/230 VAC 50/60 Hz ±10% - 1.8A
• Overload and short circuit protection - Yes

Output Power

• Power supply - FPV4
• Voltage/Current - 12V@4A or 24V@3A
• System efficiency - 83%
• BTU rating - 34 BTU
• Duty cycle - Continous
• Distribution outputs - 1

Battery Charging

• Sealed lead acid or gel type batteries - 0.7A charge rate
• Recharges battery sets within UL limit - 40Ah max
• Automatic switchover to standby battery when AC fails - Yes
• Zero transfer time when switching to battery backup - Yes
• Built-in low battery detect and cut off - Yes

Supervision

• AC Fail (form "C" contacts) - Yes
• System fail (form "C" contacts) may be triggered by
  • Low/no battery, short to earth ground
  • Power supply failure, blown fuse

Visual Indicators

• AC input, DC output, Fire Alarm - Yes
• D8P module (12DR): DC output: Blue (24V) Green (12V) - Yes

Regulatory

• UL294, ULC S319, FCC - Yes
• CSA C22.2 #107.1, CSA 22.2 #60950, FCC Part 15, Subpart B - Yes

Mechanical

• E2M, E2M1 Enclosures: 20H x 16W x 4.5D, 17 lbs - E2M Enclosure

XPRESS Wiring

• Mercury LP1502 controller and MR52 reader modules - (1) 1502 | (1) MR52

FPV4-E2M/T4X Specifications PDF