FPO150-2D8E6P LifeSafety Power Paxton 8 Door 12 Amp 12VDC 16 Auxiliary Distribution Outputs Access Control Power Supply in UL Listed Indoor 23" W x 30" H x 6.5" D Electrical Enclosure

PCLASS Unified Power Systems combine FlexPower power modules alongside Paxton Access hardware in one compact, secure enclosure.

The FPO Power Supply / Battery Charger provides two power outputs user selectable for 12 or 24 VDC. One output provides continuous output power for system use, the second is resettable output power, activated when the fire alarm disconnect is initiated.

Specifications

Input Power

• Input 120/230 VAC 50/60 Hz | 170 Watts (1.42A)
• Overload and short circuit protection
• Over temperature protection
• Polarized AC power supply disconnect

Output Power

• FPO75: 12V/12A or 24V/6A | 150 Watts
• Outputs: Continuous (DC1) Resettable (DC2)
• 16 auxiliary outputs, fused at 3A each
• 120 mV output voltage ripple
• System Efficiency: 87% | System BTU Rating: 66 BTU/Hr

Battery Charging

• Independent built-in 2A charger for sealed lead acid or gel type batteries
• Microprocessor dual rate charging of 12 or 24 V battery sets
• Automatic switchover to standby battery when AC fails
• Zero voltage drop when switched over to battery backup

Supervision

• AC Fail (form "C" contacts)
• System fail (form "C" contacts) may be triggered by low/no battery, short to earth ground and power supply failure

Visual Indicators

• AC input, DC1 and DC2 output
• System fault | AC fault | Short to earth ground | Reverse battery polarity
• Fire Alarm Input activated
• D8: DC outputs

Regulatory Compliance (LSP equipment)

• UL294, UL603, UL1076, ULC S318, ULC S319
• CSA C22.2 #107.1, CSA 22.2 #60950
• CSFM / FCC Part 15, Subpart B, CE

Enclosure Dimensions

• Enclosure Size: 30.00H x 23.00W x 6.50D in. (76.00H x 58.00W x 17.00D cm)
• Weights: 50 lbs

Access Panel Mounting

• (9) Paxton controllers (can double stack controller for higher door counts)

FPO150-2D8E6P Specifications PDF