FPO150-B1002D8E6P LifeSafety Power Paxton 8 Door 4 Amp 12VDC 4 Amp 24VDC 16 Auxiliary Distribution Outputs Access Control Power Supply in UL Listed Indoor 23" W x 30" H x 6.5" D Electrical Enclosure
|
|
|
|
|
SKU: FPO150-B1002D8E6P
- 120 or 230 VAC input
- 12 and 24 VDC outputs
- On board Fire Alarm Interface
- Continuous and resettable DC
- Sixteen, fused at 3A each
- Each programmable to either 12 or 24VDC
- Increased power, multiple voltages
- Additional distribution outputs
- Network monitoring and reporting
More details...MSRP Price: $1,346.00 Online Price: $897.00 |
DWG Dealer Price : ---
Dealers - click here to set up your dealer account today.
Existing DWG Customers - Log In to view your current dealer pricing.
|
|
|
FPO150-B1002D8E6P LifeSafety Power Paxton 8 Door 4 Amp 12VDC 4 Amp 24VDC 16 Auxiliary Distribution Outputs Access Control Power Supply in UL Listed Indoor 23" W x 30" H x 6.5" D Electrical Enclosure
|
|
|
|
| |
|
Product Details
|
|
PCLASS Unified Power Systems combine FlexPower power modules alongside Paxton Access hardware in one compact, secure enclosure. This unit is a 12V and 24V DC dual voltage networked access power system. For access or lock power, the D8 provides sixteen fused outputs rated at 3A per output, each individually programmable for 12 or 24VDC.
Specifications
Input Power - Input 120/230 VAC 50/60 Hz | 170 Watts (1.41 Amps)
- Overload and short circuit protection
- Over temperature protection
- Polarized AC power supply disconnect
Output Power - 4A@12V and 4A@24V DC, 150W maximum combined output power
- Outputs: Continuous (DC1) Resettable (DC2)
- 16 auxiliary outputs, fuse rated at 3.0 Amps per output
- 120 mV output voltage ripple
- System Efficiency: 88% | System BTU Rating: 66 BTU/Hr
Battery Charging - Independent built-in 2A charger for sealed lead acid or gel type batteries
- Microprocessor dual rate charging of 12 or 24 V battery sets
- Charges up to 80Ah battery sets within UL limit
- Automatic switchover to standby battery when AC fails
- Zero voltage drop when switched over to battery backup
Supervision - AC Fail (form "C" contacts)
- System Fault (form "C" contacts) may be triggered by low/no battery, short to earth ground, power supply failure or blown fuse
Visual Indicators - AC input, DC1 and DC2 output
- System fault | AC fault | Short to earth ground | Reverse battery polarity
- Fire Alarm Input activated
- B100: DC input, output and Fault
- D8: DC outputs
Regulatory Compliance (LSP equipment) - UL294, UL603, UL1076, ULC S318, ULC S319
- CSA C22.2 #107.1, CSA 22.2 #60950
- CSFM / FCC Part 15, Subpart B, CE
Enclosure Dimensions - Enclosure Size: 30.00H x 23.00W x 6.50D in. (76.00H x 58.00W x 17.00D cm)
- Weights: 50 lbs
Access Panel Mounting - (9) NET2 controllers (can double stack controller for higher door counts)
 FPO150-B1002D8E6P Specifications PDF
|
|
|
|
