FPO250-2D82M8NL4E8P LifeSafety Power Paxton 16 Door 20 Amp 12VDC 16 Auxiliary and 16 Managed Control Access Control Power Supply in UL Listed Indoor 30" W x 36" H x 6.5" D Electrical Enclosure

Networked PCLASS Unified Power Systems combine FlexPower power modules alongside Paxton Access hardware in one compact, secure enclosure.

This unit is a 12V and 24V DC dual voltage networked access power system.

Two M8 lock control modules provide sixteen access control inputs capable of voltage or dry contact activation, and sixteen outputs programmable for failsafe / failsecure operation at either 12 or 24 VDC and controlled by the integrated fire alarm interface circuit on the FPO. Two D8 modules provide sixteen auxiliary outputs and each output is configurable for 12 or 24VDC operation.

Specifications

Input Power

• Input 120/230 VAC 50/60 Hz | 282 Watts
• Overload and short circuit protection
• Over temperature protection
• Polarized AC power supply disconnect

Output Power

• FPO250: 12V/20A or 24V/10A | 250 Watts
• Outputs: Continuous (DC1) Resettable (DC2)
• 16 auxiliary outputs, fuse rated at 3.0 Amps per output
• 16 managed outputs, fuse rated at 3.0 Amps per output
• 120 mV output voltage ripple
• System Efficiency: 87% | System BTU Rating: 175 BTU/Hr

Battery Charging

• Independent built-in 2A charger for sealed lead acid or gel type batteries
• Microprocessor dual rate charging of 12 or 24 V battery sets
• Charges up to 80Ah battery sets within UL limit
• Automatic switchover to standby battery when AC fails
• Zero voltage drop when switched over to battery backup

Supervision

• AC Fail (form "C" contacts)
• System Fault (form "C" contacts) may be triggered by low/no battery, short to earth ground, power supply failure or blown fuse

Visual Indicators

• AC input, DC1 and DC2 output
• System fault | AC fault | Short to earth ground | Reverse battery polarity
• Fire Alarm Input activated
• D8: DC outputs
• M8: DC outputs and Fault

Regulatory Compliance (LSP equipment)

• UL294, UL603, UL1076
• ULC S318, ULC S319, CSA C22.2 #107.1, CSA C22.2 #60950
• CE | FCC Part 15, Subpart B | CSFM Approved

Physical Dimensions

• Enclosure: 6.00H x 30.00W x 4.50D in. (91.00 x 76.00 x 11.50 cm)

Access Panel Mounting

• (13) NET2 controllers (can double stack controller for higher door counts)

FPO250-2D82M8NL4E8P Specifications PDF