ACKITM1 Speco Technologies 4 Door Access Control Kit with Bluetooth Mobile Reader & Credentials

A2E4P Specifications

• Processor - Quad Core Cortex, 1.5 GHz
• Memory - 1GB DDR3 & 8GB eMMc
• Operating System - Embedded Linux
• Transactions - > 45 per second
• System Power Requirements - 115VAC @ 1.5A
• Operating Temperature - 50°F to 95°F (10°C to 35°C)
• Enclosure Size (W x H x D) - 14.25 x 14.25 x 3.75in (362 x 362 x 95mm)
• Internal Power Supply - Controller, Readers & 12V and 24V DC for Door Locks
• Lock Power Output - 375mA @ 24V, 700mA @ 12V
• Battery Backup - Controllers, Readers, & Door Lock
• Recommended Battery Type (battery is not included) - Powersonic PS-1270-FI or Similar 12V, 7AH, Sealed Lead Acid with 0.187 inch terminals
• Standby Power Requirement - 450mA @ 12V
• Readers (Wiegand) - 4 Total, One In & One Out Reader for Each Door
• Reader Power - 300mA @ 12V Max per Reader, 1000mA @ 12V Max per System
• Request to Exit (REX) Inputs - 2 Total, One for Each Door
• Door Position (status) Inputs - 2 Total, One for Each Door
• Auxiliary Input - 2 Total, General Purpose
• Tamper Digital Input - Yes, Prewired on Units with Integrated Power
• Power Fault Digital Input - Yes, Prewired on Units with Integrated Power
• Door Lock Outputs - 2 Form C Relay, 24V @ 2.0A
• Auxiliary Outputs - 2 Form C Relay, 24V @ 2.0A

A2M Specifications

• Operating Temperature - 50°F to 95°F (10°C to 35°C)
• Dimensions - 6.125 x 4.25 x 0.75in
• Internal Power Supply - Controller & Readers Only
• Readers (Wiegand) - 4 Total, One In & One Out Reader for Each Door
• Reader Power - 300mA @ 12V Max per Reader, 1000mA @ 12V Max per System
• Request to Exit (REX) Inputs - 2 Total, One for Each Door
• Door Position (status) Inputs - 2 Total, One for Each Door
• Auxiliary Input - 2 Total, General Purpose
• Door Lock Outputs - 2 Form C Relay, 24V @ 2.0A
• Auxiliary Outputs - 2 Form C Relay, 24V @ 2.0A

ACSR35L Specifications

• Model - Long-Range Mobile-Ready Contactless Smartcard Reader
• Technology - Contactless smartcard and Bluetooth Low Energy (BLE)
• Frequency - 13.56 MHz (contactless smartcard) and 2.4 GHz (BLE)
• Mounting - A single reader for metal door and window frames, single-gang wall boxes, and flat surfaces
• Dimensions - Mullion: 1.7” W × 4.7” H × 1.2” D (43 mm × 119 mm × 30 mm), Switch Plate: 3” W × 5.1” H × 1.2” D (76 mm × 130 mm × 30 mm)
• Certifications - FCC, ICC, CE, UL Standard 294
• IP Code - IP67
• Voltage - +8 -14 VDC
• Current Draw - 40mA typical @ 12VDC, 195mA peak
• Read Range - Physical Credentials: up to 1.5 inches (38 mm), Mobile Credentials: Up to 15 feet (4.6 m)
• Cabling - 24 AWG minimum, multiconductor stranded with an overall foil sheild
• Interface - Wiegand (26-64bit integrated binary card decoder and 32 formats, ABA Track II magnetic stripe (clock and data) or OSDP
• Operating Temperature - -40°F to 149°F (-40°C to 65°C)
• Audio Tone - Beeper included standard
• Indoor & Outdoor Installation - Electronics sealed in weather- and tamper-resistant epoxy potting
• Warranty - Lifetime warranty
• LED - Five-state standard (blue, red, green, amber, and off)
• Technologies Supported - Interoperable with CSN7 (may include ISO 14443 compliant credentials and MIFARE Classic 1k & 4k,MIFARE® DESFire EV1 & EV2, MIFARE UltraLight and MIFARE Plus), and Sector (may include DeltaCard Sector8, such as MIFARE® Classic 1k & 4k, MIFARE® DESFire® EV1 & EV2, as well as FIPS201 [PIVType A], TWIC, and CAC credentials), as well as Conekt Mobile Access Credentials.

ACMC2 Specifications

• Technology - Bluetooth Low Energy (BLE)
• Frequency - 2.4 GHz
• Type - Smartphone mobile access credential, downloadable via app
• Operation - iPhone® or AndroidTM - based smartphones
• Formats - Wiegand 26-bit
• Marking - Date code and ID
• Read Range - ACSR35L: Up to 15ft (4.6m)
• Supporting Readers - ACSR35L

A2E4P Specifications PDF

A2M Specifications PDF

ACSR35L Specifications PDF

ACMC2 Specifications PDF