TXF-125E-KH TAKEX 330' Selectable Range Detection 3.6V Lithium Battery Form C Relay Output

The TXF-125E-KH is a battery operated quad photoelectric beam sensor for use in TA series Beam Towers, designed for compatibility with leading wireless systems; reducing the time and cost of permanent installations and allowing the use of Active Infrared Beams on rapid deployment or temporary installations.

Specifications

• Model - TXF-125E-KH
• Detection system - Near infrared pulsed beam interruption system (TR-RE 4 beam simultaneous interruption)
• Infrared beam - Single modulation pulsed beam by LED (near infrared beam light-emitting diode)
• Protection distance - Outdoor 100 m(330') or less
• Protection distance setting - 25m(82'), 50m(165'), 75m(247'), 100m(330') (4 distances selectable)
• Distance margin (maximum arrival distance) - 10 times 1000m(3300')
• Response time - 50ms, 100ms, 250ms, 500ms (4-level changeover)
• Modulated beam frequency selection - 4 channels
• Power supply voltage - 3.6VDC (recommended battery: SAFT lithium thionyl chloride battery LS33600)
• Current consumption - 750μA Transmitter : Approx. 430μA (during protection) Receiver : Approx. 320μA (during protection) (normal temperature. 3.6V DC)
• Battery life - Transmitter :Approx. 5 years (at normal temperature. with 2 recommended batteries, excluding a transmitter) Receiver Approx. 5 years (detects 100 times a day, at normal temperature, with 2 recommended batteries, excluding a wireless transmitter)
• Alarm output (receiver only) - Dry contact relay output form C 30V DC 0.1A (resistive load)
• Environment output (receiver only) - Dry contact relay output form C 30V DC 0.1A (resistive load)
• Low battery output (transmitter and receiver) - Dry contact relay (N.C) 30V DC 0.1A (resistive load)
• Power output (transmitter and receiver) - 3.0V DC 65mA MAX
• Beam adjustment - Horizontal : ±90°, Vertical: ±20°
• Alarm LED - Red LED (Receiver) ON : when alarm is initiated
• Attenuation LED - Red LED (Receiver) ON :when beam is attenuated
• Ambient temperature - —25°C to+60°C (-13°F to+140°F) (No freezing or condensation) (The battery function may decrease at O°C or less, or +40°C or more)
• Functions - Sound check Monitor jack Upper/lower beam switch Low battery indication Wireless alignment checker connection Battery saving Repeat output Battery sharing
• Mounting position - Outdoor, Indoor
• Weight - Transmitter: Sensor Unit 500g (17 5oz) Base 620g (21.7oz) excluding batteries Receiver: Sensor Unit 550g (17.5oz), Base 620g (21.7oz) excluding batteries
• Appearance - Sensor unit : Resin Base (Black)

TXF-125E-KH Installation Manual