AMT-Omni-AC30-LHF ZKTeco USA Standalone Biometric Reader with Palm Recognition

Specifications

General Information

• Primary Power - 12 to 24 VDC (3A min @12V)
• POE - Supported
• RS485 connection - Port 1: RS485 standard / OSDP V2.1.7
• CPU - 1.2 GHZ Quard Core ARM Processor
• NPU - 2.4 TOPS NPU
• Memory - 8 GB Flash + 1 GB RAM
• Camera
  • Face Automatic Exposure
  • Palm Automatic Exposure
  • Face tracking
  • Palm tracking
  • WDR
  • HDR
  • 50Hz to 60Hz Automatic Adaption
  • Dual Camera
  • CMOS 2MP（Output image 720P*960P）
• Primary Host - Ethernet: 10/ 100 Mbps, auto MDI/ MDIX
• Communication - Complies with TLS 1.2 for end to end secure communication channel
• Ethernet network connection - Port 1:10/ 100 Mbps, auto MDI/ MDIX
• Data Protection - Complies with TLS 1.2 for end to end secure communication channel (Secured Communication between Standalone Terminal & Server), AES128 (Secured Communication between Standalone Terminal & OSDP Reader & Access Control Panel)
• Number of Ports
  • 1*TCP/IP
  • 1*RS-485
  • Input: 4ch TTL Inputs
  • Output: 1ch TTL Output
  • 2 relays
• Inputs - Wiegand in, Button, Sensor in, Aux Input
• Outputs - 2 relays with dry contacts, Wiegand Output, Lock, Alarm
• Normally Open Contact Rating - 5A @30Vdc resistive
• Normally Closed Contact Rating - 5A @30Vdc resistive
• Tamper Switch - Magnetic tamper detection system
• On-Board Monitor - Size: 5", Resolution: 1280*720, Touch Monitor，TFT
• Audio Indicator - Internal speaker with adjustable intensity (Configurable on UI)
• MIC - Supported
• User Capacity - 50,000
• RFID Card Capacity - 50,000 (1:N)/ 50,000 (1:1)
• Maximum RFID Card Number Length - Wiegand In & Out (up to 64 bits)
• Face Capacity - 10,000 (1:N)/ 50,000 (1:1)
• Palm Capacity - 5,000 (1:N)/ 20,000 (1:1)
• RFID Reading Distance - 13.56MHz & 125kHz: Up to 1.96"/ 50 mm (depending on environment and transponder)
• Face Recognition Distance
  • Dual Camera Liveness Detection On - 15.7" - 55.1" (40cm - 140cm)
  • Single Camera Liveness Detection On - 15.7" - 78.7" (40cm - 200cm)
• Palm Recognition Distance and Angle Tolerance - 7" - 15.7" (18cm - 40cm) / Pitch +/- 35, Yaw +/- 60, Roll +/-35, Blend +/-30
• Face Recognition Speed - 100ms (Field Test Result)
• Live Face Detection (Anti-Spoofing) - Supported
• Recommend Installation Height
  • Recommended Installation Height - 55" (140cm) (Using the plate with tilt angle), 59" (150cm) (Plate with horizontal angle)
• Palm Recognition Speed - 140ms (Field Test Result)
• Transaction Buffer - Records: 1,000,000
• Access group - 99
• On-Board Access Point Control - 1 access point on board
• On-Board Reader Support - 1 (OSDP over RS485) or 1 (Wiegand Input)
• Protection / Resistance - Weather & Dust Proof Protection Rating compliant with IP66

RFID / Biometrics Reader Interface

• Input Voltage - 12 to 24 VDC (3A min @12V) (Equal to primary power input)
• Maximum Input Current - 12 to 24 VDC (3A min @12V) (Equal to primary power input)
• RS-485 Protocol - OSDP 2.1.7 Secure Channel, AES-128
• OSDP Mode - 9600-115200 bps, OSDP V2.1.7, asynchronous, half-duplex, 1 start bit, 8 data bits, and 1 stop bit
• Wiegand - Wiegand In & Out (Up to 64 bits)
• Data Inputs
  • TCP/IP, RS485, OSDP and Wiegand standards supported
  • Maximum RS485/ OSDP cable length: 500ft (152m)
  • Maximium Wiegand cable length: 328ft (100m)

Cable Requirement

• Power & Relays - One twisted pair, 18 to 16 AWG
• Ethernet - CAT-5, minimum 330 ft. (100m)
• RS-485 Reader Port - 9600-115200 bps, asynchronous, half-duplex, 1 start bit, 8 data bits, and 1 stop bit. One twisted pair with drain wire and shield, 120 ohm impedance, 22-18 AWG, Maximum cable length: 3937ft (1200m)
• Wiegand Port - 20 AWG shielded ,328ft. (100m)

Mechanical

• Dimensions - 3.82" W x 1.112" D x 8.23" H (97 x 28.5 x 209mm)
• Weight - 835g
• Mounting - Suited for mullion-mount door installations or any flat surface mounting Supports mounting plate installation (Single gang/ European/ Asian box) Supports rots-02 bracket
• Housing Material - Aluminium alloy + Tempered glass

Enviormental

• Operating & Storage Temperature - -4°F ~ 140°F (-20°C ~ 60°C)
• Operating Humidity - 10 - 95% RH (Non-condensing)
• Certification(s) - CE, FCC, RoHS，UL (coming soon)

Software Interface

• TCP/IP Mode - Ethernet: 10 - 100Base-TX
• TCP/IP Protocol - VLAN, SSH, HTTP, IPv4, DNS
• TCP/IP Encryption - Complied up to TLS1.2 end to end secure communication channel
• TCP/IP Communication - Push Protocol over HTTP，HTTPS and BEST Protocol over websock
• Supported Software - Armatura One Security System, Cielo365

AMT-Omni-AC30-LHF Specifications PDF