NV-216A-PV NVT Video Transceiver

The NVT Model NV-216A-PV Video Transceiver with Power is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.

The NVT Model NV-216A-PV video transceiver allows transmission of CCTV video and low voltage power over UTP cable. The NV-216A-PV incorporates the transceiver engine of NVT’s popular NV-213A video transceiver with the added value of camera power connections. Power and Video are routed via UTP and RJ45 connections. Used at the camera, the passive NV-216A-PV has a compact body, a male BNC for direct connection to the camera, and is compatible with NVT’s PVDTM product line. Connect the RJ45 to 4-pair cable to be routed to the NVT cable integrator and on to an active or passive receiver hub in the MDF/Control Room.

The unparalleled interference rejection and low emissions of the NV-216A-PV allows video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. As with all NVT products, the NV-216A-PV carries a limited lifetime warranty are UL and cUL listed and CE, WEEE and RoHS compliant.

Specifications:

• Model Number - NV-216A-PV
• Video Frequency response - DC to 5 MHz
• Video Attenuation - 0.5 dB typ
• Common-mode / Differential-mode rejection 50 KHz to 5 MHz - 60 dB typ
• Impedance Coax/UTP - 75 ohms/100 ohms
• Network Wiring - One Unshielded Twisted Pair 24-16 AWG (0,5-1,31 mm)
• Category Type - 2 or better
• Impedance - 100 ± 20 ohms
• DC Loop Resistance - 52 ohms per 1,000 ft (18 ohms per 100 m)
• Differential Capacitance - 19 pF/ft max (62 pF/m max)
• Dimensions (LxDxH) - 1.6 x 0.88 x 0.81 in
• Weight - 1.0 oz (30g)
• Temperature - -20 to +75°C
• Humidity (non-condensing) - 0 to 95%
• Transient Immunity - per ANSI / IEEE 587 C62.41

NV-216A-PV Specifications PDF