NV-16PS10-PVD NVT 16 Channel Power Supply Cable Integrator Hub

The NVT model NV-16PS10-PVD combines a 1 Amp/channel power supply with pass through video and telemetry data, for up to 16 cameras, all over UTP wire. Designed for installation in the wiring / IDF telecom closet, or at the Control /MDF room, the NV-16PS10-PVD consolidates connectivity via standard 4-pair RJ45 EIA/TIA 568B compliant premises wiring and pinouts.
At the camera, Power, Video and Data connections are made using the NV-216A-PV (power-video only) or the NV-218A-PVD transceiver via an RJ45 connector and a single 4-pair cable. Control / MDF room connections are achieved with a single 4-pair RJ45 cable for each group of four cameras. Consolidated telemetry data, if required, passes through the NV-16PS10-PVD’s Data path, and is connected to the controller via another 4-pair RJ45 cable.

Specifications

• Camera Power-Video-Data Connections - Sixteen front-panel RJ45 outputs support up to sixteen fixed or P/T/Z telemetry cameras over 4-pair UTP Cat 5 or better.
• Power Output - Each camera is powered by a fully isolated (floating) Class 2 SELV output, individually switchable 24VAC / Off / 28VAC at up to 1 Amp, with an aggregate load of up to 10 Amps. Each output is individually thermistor protected for auto-reset after fault removal.
• Wire Distance - Supply voltage, wire resistance and minimum camera operating voltage determine the maximum camera distance.
• Front-Panel LEDs
  • Blue LED - System Power On
  • Per-channel LED indicates
    • Off - No load connected
    • Green - Load connected & working
    • Amber - Mis-wiring detected
    • Red - Overload shutdown condition
• Control Room Video - UTP video signals are passed through the unit and delivered to the control / MDF room via rear-panel RJ 45 connectors
• Control Room Data - RS-422 or RS-485 type P/T/Z telemetry / data signals are paralleled together in groups of four, and passed through the unit and delivered to the control room via a rear-panel RJ45 connector
• Power Input
  • On-off switch Rear panel - Rear panel
  • Voltage - 115 / 230 VAC
  • Current - 2.5 / 1.25 Amps
  • Frequency - 50 / 60 Hz
  • Protection - 5A slo-blo 8x20 mm fuse & thermal shutdown
  • Wattage - 300 Watts
  • Heat - 1000 BTU/hour
• Environmental
  • Ambient Temperature - 0 to +140°F (-20 to +50°C)
  • Minimum airflow - 4 ft3 / min (0.1 m3 / min)
  • Humidity (non-condensing) - 0 to 95%
  • Transient Immunity - per ANSI 587 C62.41
• Mechanical
  • Dimensions, including connectors
    • 19 in wide, 1.73 in high, 12 in deep
    • 483 mm wide, 44 mm high, 305 mm deep
  • Weight - 22 lb (10 kg)
  • Mounting - Wall, desk, or rack mount, brackets included

NV-16PS10-PVD Specifications PDF