NV-872 NVT 8 Channel DigitalEQ Active Receiver Distribution Amplifier Hub

The NV-872 is a 8-channel active (amplified) hub that allows the transmission of real-time monochrome or color video for distances up to one mile (1,6Km) using Category-2 or 3 Unshielded Twisted-Pair (UTP) wire, or up to 1.5 miles (2,4km) NTSC using Category-5 or better. The Receiver hub continuously and automatically compensates for cable attenuation, ground-loops, and wiring polarity, independent of video signal image. The 1U high hub features four outputs per channel for high-density distribution amplifier applications, and is equipped with multi-stage transient protection.

Specifications:

• Model Number - NV-872
• Frequency response - DC to 10 MHz
• Equalization - Automatic (no adjustment) 0 to 3000 ft (0 to 1 Km) for NTSC or PAL standards Automatic polarity detection and control
• Common-mode / Differential-mode rejection 15 KHz to 5 MHz - 60 dB typ
• Impedance Coax/UTP - 75/100 ohm
• Network Wiring - One Unshielded Twisted Pair 24 - 16 AWG (0,5-1,31mm)
• Category Type - 2 or better
• Impedance - 100 ± 20 ohms
• DC Loop Resistance (24AWG) - 52 ohms per 1,000 ft (18 ohms per 100 m)
• Differential Capacitance - 19 pF/ft max (62 pF/m max)
• Temperature - 32F to 132 °F
• Humidity (non-condensing) - 0 to 95 %
• Transient Immunity - per ANSI / IEEE 587 C62.41
• Power - IEC380 power inlet
• Weight - 4.8 lb (2,2 kg)
• Dimensions - 17 in wide, 1.7 in high, 8.125 in deep
• Mounting - Rack mount “L” brackets for front, rear, or wall installations; rubber feet for desk applications
• Cables - IEC power cord 7 ft (215 cm). Eight 2 ft (60 cm) coax jumpers

NV-872 Specifications PDF