The cart is empty.
Dealers. First. Always.
DWG

[DISCONTINUED] NV-862 NVT 8 Channel Active Receiver Distribution Amplifier Hubs

SKU: NV-862

  • Full-motion CCTV video at distances up to 3,000ft (1km) when used with any passive NVT transceiver or hub, 5,280ft/1 mile (1,6km) when used with NV-653T active transmitter and Category UTP wire
  • 8-channel hubs feature four outputs/channel
  • Supports screw-terminal or RJ45 UTP video inputs (NV-RJ45A)
  • High-Density 19” 1U high enclosure
  • Compatible with qualified UTP cameras
  • Built-in transient protection and ground lifting
  • Built-in sharpness and brightness controls; Green Active LED for each port
  • Includes 2ft (60cm) coax jumper cables and rackmount hardware
  • Limited lifetime warranty
More details...
MSRP Price: $1,920.00
DISCONTINUED
Save to my Wish List

DWG Dealer Price : ---


Dealers - click here to set up your dealer account today.

Existing DWG Customers - Log In to view your current dealer pricing.



Previous Item   Next Item
Product Details

The NVT Model NV-862 is an 8-channel active (amplified) distribution amplifier device that allows the transmission of real-time monochrome or color video on up to one mile (1,6km) using Category Unshielded Twisted-Pair (UTP) wire.

The 8 channel distribution amplifier hub features quadruple outputs for large high-density applications. 1U rack-mountable active receiver distribution amplifier hubs provide signal conditioning in the form of ground-lifting, distance EQ, and transient protection.

The unparalleled interference rejection and low emissions allow long run video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of shared or existing cable plant. Ground-lifting ensures no annoying “hum-bars” when ground potential differences exist. With built-in transient protection, damaging voltage spike problems are eliminated. Perfect for larger CCTV installations where port density and camera number growth are prevalent.

Specifications:

  • Model Number - NV-862
  • Frequency response - DC to 5 MHz
  • Common-mode / Differential-mode rejection 15 KHz to 5 MHz - 60 dB typ
  • Impedance Coax, female BNC/UTP, Screw Terminal Block or RJ45 - 75ohms/100ohms
  • Network Wiring - One Unshielded Twisted Pair 24 - 16 AWG (0,5-1,31mm)
  • Category Type - 2 or better
  • Impedance - 100 ± 20 ohms
  • DC Loop Resistance (24AWG) - 52 ohms per 1,000 ft (18 ohms per 100 m)
  • Differential Capacitance - 19 pF/ft max (62 pF/m max)
  • Temperature - 0 to +50°C
  • Humidity (non-condensing) - 0 to 95%
  • Transient Immunity - per ANSI / IEEE 587 C62.41
  • Power - 115/230V, built-in, 50/60Hz 160 mA
  • Weight - 4.8lb (2,2kg)
  • Dimensions - 17in wide, 1.7in high, 8.125in deep
  • Mounting - Rack mount “L” brackets for front, rear, or wall installations; rubber feet for desk applications
  • Cables - Eight 2ft (60cm) coax jumpers
  • NV-RJ45A - Two Male RJ45-to-Screw Terminals

NV-862 Spec Sheet


Product Reviews

Write your own review

 

Rate this product:


DWG - 800 Shames Drive , Westbury , NY 11590 , USA - 516-933-4900
Connect with us on Social Media   Facebook   Instagram   Twitter   Linked In