AL400ULX Altronix UL Power Supply/Charger w/ Enclosure 12VDC @ 4amp or 24VDC @ 3amp

AL400ULX is a multi-output power supply/charger that converts a 115VAC/60Hz input into single Class 2 Rated 12VDC or 24VDC power limited outputs.

Specifications

Inputs

• Voltage - 115VAC, 60Hz, 3.5A max.
• Fusing - 5A / 250V.

Output

• Voltage - 12VDC or 24VDC selectable.
• Current - 4A @ 12VDC or 3A @ 24VDC continuous max.
• Protection - Fused 3.5A / PTC 2.5A.
• Other - Overvoltage protection. Filtered and regulated outputs.

Back-up Battery (not included)

• Capacity - 7AH / 12VDC (1 or 2 within enclosure), 12AH / 12VDC (1 or 2 within enclosure). 18AH / 12VDC (requires larger "J" enclosure). 40 AH / 65 AH (requires separate enclosure).
• Fuse Rating - 15A @ 32VDC.
• Type - Sealed lead acid or gel type.
• Failover - Upon AC loss, instantaneous.

Supervision

• AC Failure - Form "C" contacts.
• Battery - Form "C" contacts.

Indicators (LED)

• Input - 115VAC is present.
• DC Output - Powered.
• Battery - Discharged or not connected.

Agency Listings

• UL
  • UL294 - Access Control System Units.
  • UL603 - Power Supplies for Use with Burglar-Alarms Systems.
  • UL 1069 - UL Listed Hospital Signaling and Nurse Call Equipment.
  • UL1481 - Power Supplies for Fire Protective Signaling Systems.
• cUL
  • CSA C22.2 No.205 - Signal Equipment.
• AL400ULX, AL400ULXX and AL400ULXJ only
  • CSFM - California State Fire Marshal Approved.
  • MEA - NYC Department of Buildings Approved
  • FM - Factory Mutual Approved

Physical and Environmental

• Dimensions (H x W x D) - 13.5" x 13" x 3.25" (342.9mm x 330.2mm x 82.55mm).
• Product Weight / Shipping (approx.)
  • Product Weight - 6.95 lbs. (3.15 kg)
  • Shipping Weight - 8.75 lbs. (4.0 kg)
• Temperature
  • Operating - 0°C to 49°C (32°F to 120°F).
  • Storage - -20°C to 70°C (-4°F to 158°F).
• Relative Humidity - 85% +/-5%
• BTU/Hr. (approx.)
  • 12VDC - 25 BTU/Hr
  • 24VDC - 37 BTU/Hr

AL400ULX Spec Sheet

AL400ULX Installation Manual