The cart is empty.
Dealers. First. Always.
DWG

AL1024ULM Altronix 5 Output PTC Power Supply/Charger w/ Fire Alarm Disconnect and Enclosure 24VDC @ 10 Amp

SKU: AL1024ULM
  • Fire Alarm Panel or Access Control System trigger inputs. [NO] or [NC] supervised trigger input and polarity reversal trigger input (4mA draw from FACP).
  • Five (5) individual power-limited Class 2 outputs (auto-resettable).
  • Filtered and electronically regulated outputs.
  • Thermal and short circuit protection with auto reset.
  • Overload protection.
  • Output relay energizes when unit is triggered (form "C" contact rated 1A @ 28VDC).
  • Supervision: AC Fail, Battery Fail and Battery Presence
  • Built-in charger for sealed lead acid or gel type batteries
  • Instantaneous transfer to stand-by batteries
More details...
Ordering Notes: Dealers Only
MSRP Price: $604.00
Online Price: $431.00
Save to my Wish List

DWG Dealer Price : ---


Dealers - click here to set up your dealer account today.

Existing DWG Customers - Log In to view your current dealer pricing.



Previous Item   Next Item
Product Details

AL1024ULM multi-output access control power supply/charger is specifically designed for use with access control systems and accessories.This unit converts a 115VAC, 60Hz input into five (5) individually protected Class 2 Rated power limited 24VDC outputs. Each output will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc.


Specifications


Input

  • Voltage Range - 115VAC, 60Hz.
  • Fusing - Varies, see Reference Chart.

Outputs

  • Voltage - 12VDC or 24VDC, see Reference Chart.
  • Current - Varies, depending on the model.
  • Protection - PTC 2.5A.
  • Other - Overvoltage protection.Filtered and regulated outputs.

Back-up Battery (not included)

  • Capacity - 12AH / 12VDC
  • Type - Sealed lead acid or gel type.
  • Fuse Rating - 15A @ 32VDC. AL600ULM(X) does not have a battery fuse.
  • Failover - Upon AC loss, instantaneous.

Supervision

  • AC Failure - Form "C" contacts.
  • Battery - Form "C" contacts.

Indicators (LED)

  • Input - 115VAC is present.
  • DC Output - Powered.
  • Battery - Discharged or not connected.
  • Power and Input - Individual LEDs indicate outputs are. triggered (relays energized).

Agency Listings

  • All Models
    • UL
      • UL294 - Access Control System Units.
    • cUL
      • CSA C22.2 No.205 - Signal Equipment.
  • All Models in Series, Except AL1012ULM
    • UL1481 - Fire Protective Signaling Systems
    • CSFM - California State Fire Marshall Approved.

Physical and Environmental

  • Dimensions (H x W x D) - 15.5" x 12" x 4.5" (393.7mm x 304.8mm x 114.3mm).
  • Product Weight - 10.8 lbs. (4.90 kg)
  • Shipping Weight - 11.8 lbs. (5.35 kg)
  • Temperature
    • Operating - 0°C to 49°C (32°F to 120°F).
    • Storage - -20°C to 70°C (-4°F to 158°F).
  • Relative Humidity - 85% +/-5%.
  • BTU/Hr. (approx.) - 24VDC: 123

AL1024ULM Spec Sheet

AL1024ULM Installation Manual


Product Reviews

Write your own review

 

Rate this product:


DWG - 800 Shames Drive , Westbury , NY 11590 , USA - 516-933-4900
Connect with us on Social Media   Facebook   Instagram   Twitter   Linked In