VB43ATF Nitek Video Balun Combiner for Twisted Pair up to 750 feet (228 meters)

Video Balun Combiner for twisted pair up to 750 feet (228 meters) in conventional UTP applications, 100 meters in TIA/EIA 568 applications.

The VB43ATF is a unique transmission device which provides an economical means of sending video, camera power and 2-wire control signals over a standard Category 5 cable. Video is sent over one pair, 2-wire control signals over a second pair and camera power is sent over the two remaining pairs. A mini-coax pigtail with male BNC is used on the VB43ATF. Two pair of screwless terminals are provided to connect 2-wire control signals and power (wires are provided for these connections). Connections to the Category 5 cable are made via an RJ45 connector. The VB43ATF Video Balun provides the same high immunity to noise and interference as all of the Nitek baluns.

This simplified wiring scheme provides a convenient method of powering the camera, allowing for quicker and easier installations. The RJ45 modular jack uses standard 568B wiring so spare network cables can be used.The VB43ATF also offers indication lights for the presence of power and data.

Specifications:

• Model Number - VB43ATF
• Size - 0.87"H x 1.87"W x 1.25"D
• Power Requirements - NONE REQUIRED
• Power Pass Through - 250mA @ 1,000 feet on 24 AWG. 1 Amp @ 100 feet on 24 AWG.
• Video Input - 1 vpp composite video Monochrome or Color
• Output - Balanced low voltage current loop
• Modular Jack - Standard RJ45
• Video Format - RS170, NTSC, PAL, SECAM, CCIR (Color or B/W)
• Video Input - 1 Vpp composite video Monochrome or Color
• Operating Frequency - DC to 10 MHz
• Common Mode Rejection - >60 dB typ
• Wire Spec - 26 to 12 AWG Unshielded Twisted Pair (UTP)
• Temperature Range - 0 degrees C to +85 degrees C
• Humidity Range - 0 to 98%, non-condensing
• Twisted Pair Connection - RJ45 modular connector
• Transient Immunity - Built-in

VB43ATF Spec Sheet