VH1656 Nitek Video Receiver Hub 16 Ports Selectable 100ft to 6000ft

8 or 16 port active video hubs with dual outputs, built-in surge suppression, ground loop isolation, gain/loss control, and video detection. Systems operate with other Nitek UTP video equipment including, video transceiver hubs, standard video balun transceivers, active transmitters, or any twisted pair equipped camera.

Multi-channel video receiver hubs provide excellent video quality through two video outputs per channel. Twisted pair installations are made with a choice of the standard screw terminal connections, or the modular jack connections featured on the ‘M’ series. The VH1651M can receive video up to 1,500 feet (457 meters) when used with passive transmitters. These hubs provide superior immunity from noise and interference, even when run in common raceways with AC power.

Specifications:

• Model Number - VH1656
• Size - 1 RU x 6.0"D
• Power Requirements - 24 VAC @ 450mA (Wall transformer provided with unit)
• Video Input - Balanced low voltage current loop
• Video Output - 1 Vpp composite video monochrome or color
• Common Mode Rejection - >70dB
• Video Format - RS170, NTSC, PAL, SECAM, CCIR (Color or B/W)
• Twisted Pair Connection - R45 Jack
• Output Connection - Dual BNC Connecotrs
• Wire Spec - 26 to 12 AWG Unshielded Twisted Pair
• UTP Category - Unshielded Category Cabling
• Operating Frequency - DC to 10 MHz
• Recommended Transmission Distance - Up to 3,000 feet (914 meters) w/Passive Baluns, Up to 6,000 feet (1,828 meters) w/Active Transmitters.
• Transient Immunity - Built-in
• Temperature Range - -20 degrees C to +55 degrees C
• Humidity Range - 0 to 98% non-condensing
• Enclosure Type - Standard 19" rack 1 RU in height
• Shipping Weight - 8 lbs

VH1656 Spec Sheet