WB42 Nitek Video Balun Transceiver Wall Plate - Upto 750ft

Video balun combiner for twisted pair up to 750 feet (228 meters). Assembly comes mounted to a 2-3/4" x 4-1/2" brushed stainless steel wallplate.

Video balun combiner & wallplate is a unique transmission device that provides an economical means of sending video, camera power and RS422 over a standard Category 5 cable. A typical system would require a WB42 video balun combiner & wallplate at one end of a 4-pair Category 5 cable, with a VB43F video balun combiner at the opposite end. Video is sent over one pair, RS422 over a second pair and camera power can be sent over the two remaining pairs. A female BNC connector provides video input. RJ45 connectors are used to feed RS422 control and power in and out, for connection to Category 5 cables. The video balun in the WB42 provides the same high immunity to noise and interference as all of the Nitek baluns.

The unique design of the WB42 allows the combination of video, power and data in a 4-pair Category 5 cable. This simplified wiring provides a convenient method of powering the camera, allowing for quicker and easier installations. The RJ45 modular jacks use standard 568B wiring so spare network cables can be used. The WB42 mounts to a standard electrical box.

Specifications:

• Model Number - WB42
• Size - 4.5"H x 2.75"W x 1.4"D (Not including BNC)
• Power Requirements - NONE REQUIRED
• Input Video - 1 vpp composite video Monochrome or Color
• Output - Balanced low voltage current loop
• Modular Jacks - Standard RJ45

WB42 Spec Sheet