SPR-1 PulseWorx - Split Phase Repeater - Wire-in - White

The SPR-1 Split-Phase Repeater is a small electronic device that is designed to repeat communication signals between devices that use Universal Powerline Bus (UPB) technology. It is designed to be used in larger installations typically 5000 sq. ft. or larger residential 120/240VAC split-phase environments.
The main purpose of the SPR-1 is to increase powerline communication reliability by taking UPBR messages transmitted on one phase (leg 1) of the electrical system and strongly repeating them on to the other phase (leg 2). Recommended to be installed at the main electrical panel on installations with 3 or more panels. When used with UPStart the SPR will test and confirm signal strength to each and every device in your system.

Specifications

ELECTRICAL

• Power Requirements - 120V/240V AC 50Hz/60Hz
• Connections/Power Wire
  • Three 16 AWG gauge 105 C insulation
  • Black – Line 1
  • Red - Line 2
  • White – Neutral
• Standby Power Consumption - .8 Watts
• Environmental Conditions
  • Indoor Use Only or water-proof enclosure next to circuit breaker panel
  • Temperature: -40° to 194°F (-40° to 90°C)
  • Humidity: 10% to 90% RH (non-condensing)

OPERATION

• Set-Up Mode - Tap program button 5 times
• Status LED Modes
  • RED = Transmitting a signal
  • MAGENTA = Receiving a signal
  • BLUE = Normal Mode Power Applied
• LED Indicators - Red /Blue LED
• During Power Outage - Retains all settings in Non-volatile EERPOM

MECHANICAL

• Set Button Type - Button
• Mounting - Single Gang Stardard J Box or 1/2" Knock out
• Dimensions - Height: 2.75 in Width: 2.25 in Depth: 1.50 in
• Weight - 5 oz.
• Warranty - 5 years