LM2-8 PulseWorx Lamp Module, 2 Channel, 800W Max

The Dual Channel Lamp Module ( LM2-8) is perfect for master bedrooms and living rooms where two lamps need to be remotely controlled. Simply plug the LM2 into any standard wall outlet and plug the lamp(s) into the LM2’s two bottom controlled outlets.
The LM2 is designed for controlling incandescent, fluorescent, or magnetic low voltage loads. It can provide as much as 800W of total power at any one time split between the two channels. The dimmer function can also be disabled, turning the outlets into a switch to turn on and off non-dimmable loads such as fans or radios. Two continuous power outlets are also available.

Specifications

ELECTRICAL

• Power Requirements- Primary: 120 Volts AC, 50/60Hz
• Max. Wattage
  • 800W Max - Divided between two channels
  • 6A - Fluorescent Load
• Current Surge - 250A
• Environmental Conditions
  • Indoor Use Only
  • Temperature: -40° to 140°F (-40° to 60°C)
  • Humidity: 10% to 90% RH (non-condensing)

OPERATION

• LED Indicator- Two LEDs
• During Power outage- Retains all settings in Non-volatile EERPOM
• Set-Up Mode - Press the setup button 5 times.

MECHANICAL

• Dimensions- Height: 5.31 in Width: 3.88 in Depth: 1.375 in
• Weight- 11.2 oz.
• Warranty- 5 years