ICM PulseWorx - Input Control Module, 2 Channel, Contact or 30VDC/24VAC

The ICM Input Control Module is a high quality plug-in home automation controller device designed to interface off-the-shelf low voltage or contact closure sensor devices to the PulseWorx Lighting Control System.
The Input Control Module provides two independent channels of general purpose isolated contact closure sensing inputs to activate single lights, trigger dramatic scenes, or send messages to a central controller.

Specifications

ELECTRICAL

• Power Requirements-Primary: 120 Volts AC, 50/60Hz (also see setup guide for further details)
• Transmission Channels-2-Channels, 1 Link/Scene per channel
• Environmental Conditions
  • Indoor Use Only
  • Temperature: -40° to 104°F (-40° to 40°C)
  • Humidity: 10% to 90% RH (non-condensing)

OPERATION

• Input Types
  • Contact closure
  • 5-24V AC or DC
• Connection-4 screw teminals, 16AWG
• During Power outage-Retains all settings in Non-volatile EERPOM
• Set-Up Mode -Press the setup button 5 times, the LED blinks

MECHANICAL

• Dimensions-Height: 3.00 in Width: 2.00 in Depth: 1.25 in
• Weight-5.0 oz.
• Warranty-5 years