[DISCONTINUED] PERS-2400B Linear Personal Emergency Reporting System

Specifications

• Model Number: PERS-2400B
• Transmitter Capacity: 16 DX or DXS devices
• Operating Frequency: 315 MHz RF Format: Linear DX, DXS
• Receiver Type: diversity, dual superheterodyne
• RF Programming Method: Linear quick-learn
• COMMUNICATIONS:
• Communicator Formats: Contact ID and 4 x 2
• Dialing Method: pulse or tone dialing formats, field enabled
• Communicator Reports: All transmiter alarms; all transmitter trouble - supervisory, low battery; all inactivity alarm reports; AC power failure; AC power restored; console low battery; console emergency alarm
• CONSOLE:
• Controls: EMERGENCY: large round button with multiple actuation points, Braille characters; CLEAR: momentary for system reset, call cancellation; HOME: momentary to reset timer or press and hold for 3 seconds to disable the function; POWER SWITCH: controls 120 VAC source, as well as the backup battery
• Indicators: four LEDs (POWER ON, TROUBLE, SENDING, HOME)
• Inputs: In and out telephone jacks
Outputs: one form "C" relay output activated upon initiation of any alarm condition
• Programming Method: via RA-2400 remote access software
• Inactivity Timer: software programmable for 8, 12, or 24 hour cycles
• Silent Alarm Feature: software programable per channel
• Delayed Alarm Feature: Software programmable per channel; delay time 15 or 30 minutes; note that an alarm will not be transmitted if alarming transmitter sends a restore signal to the console prior to delay timer timeout
• Selectable Two-Way Voice Activation: software programmable per channel
• Speakerphone Option: software programmable; call duration time selectable for 15 or 30 minutes
• Pulse/Tone Dialing: software or console programmable
• Audible Output: integral siren
• Output Tones: distinct alarm tones provided for emergency and fire alarm conditions; provisions for timer reset tone also incorporated into system
• Backup Battery: recommended battery is 12V, 1.2 amp-hour; Linear part number 100104
• Backup Period: 32 hours minimum with VB-4 voice board installed in the unit
• Listing: UL per Standard 1637, Home Healthcare Signaling Equipment
• Dimensions: 7.5" W x 8.75" H x 3" D