POE21-120H Phihong DC-DC Power over Ethernet Splitter 10W for POE Cameras and 12VDC for Heaters & Illuminators

• Input - Unit receives power from Phihong PoE Plus
Midspans only using Cat 5e or Cat 6 wiring up to 100 meters per IEEE802.3
• DC Input Current - 0.7A (DC) and 45VDC at maximum load
• DC Input Voltage Rating - 45 – 57VDC for 12V
• DC Output - Center Positive Barrel 12mm x 2.1mm ID x 5.5mm OD (Tip is user changeable for other sizes)
• Regulation - Line and Load ±2%
• Ripple - 120mV maximum at 25oC
• Efficiency - 75% minimum at maximum load, 48V input
• O/P Voltage Protection - In case of output over voltage overload, crowbar will short. The output can be shorted permanently without damage.
• Temperature -
• Operation: 0 to +40°C
• Non-Operation: -20 to +65°C
• Humidity Operation - 5 to 90%
• Immunity -
• ESD: EN61000-4-2. Level 3
• RS: EN61000-4-3. Level 2
• (Note: RS and ESD tested with POE36U-1AT)
• EMC - EN55022 Class A, FCC Part 15 Class A
• Dielectric withstand (HI-POT) Test - Primary to secondary: 2121VDC for 1 minute, 10mA
• Insulation Resistance - Primary to Secondary: >10M Ohm 500V DC
• Warranty - 1 Year
• Input and Output Data Connector - RJ45
• Output Connector - POE and data RJ45 Jack
• Safety Approvals - CE
• Weight - 0.31 lb
• Size - 100mm x 56mm x 28mm

POE21-120H Specifications PDF