Dealers. First. Always.       |      The professional integrators favorite security distributor for over 20 years and counting.
DWG



Popular Everyday Products

POE75U-1UP Phihong 75W Power over Ethernet Adapter Ultra Power over Ethernet Single Port Injector

SKU: POE75U-1UP

  • Features:
    • Fully Compliant Detection, Disconnect and Voltage Control IEEE802.3af
    • SNMP Management Option
    • Single Source 4 Pair Power Current Sharing
    • Diagnostic LEDs
    • Full Protection OCP, OVP
    • Non-vented case
    • Broken Wire Detect Applications
    • Limited Power Source
    • Proprietary Detection, Disconnect and Overload Protection
More details...
MSRP Price: $244.00


DWG Dealer Price : ---


Dealers - click here to set up your dealer account today.

Existing DWG Customers - Log In to view your current dealer pricing.



POE75U-1UP Phihong 75W Power over Ethernet Adapter Ultra Power over Ethernet Single Port Injector
POE75U-1UP Phihong 75W Power over Ethernet Adapter Ultra Power over Ethernet Single Port Injector
Previous Item   Next Item
 
Product Details
  • AC Input Voltage Range - 90 to 264VAC
  • AC Input Voltage Rating - 100 to 240VAC, 47-63 Hz
  • AC Input Current - 2.0A (RMS) maximum for 90VAC, 1.2A (RMS) maximum for 240VAC
  • Leakage Current - 3.5mA maximum @ 254VAC 60Hz
  • AC Inrush Current - 30A (RMS) maximum for 115VAC, 60A (RMS) maximum for 230VAC
  • Total Output Power - 75W
  • DC Offset - No Data degradation with DC imbalance 18mA per min.
  • Efficiency - 80% (typical) at maximum load, and 120VAC 60Hz
  • Hold Up Time - 10mS minimum 120VAC and maximum load
  • Transient O/P Voltage Protection - 60V maximum
  • Temperature -
    • Operation: -20 to +40™C
    • Non-Operation: -25 to +65™C
  • Humidity Operation - 5 to 90%
  • EMC - FCC Part 15 Class B, EN55022 Class B
  • Immunity -
    • ESD: EN61000-4-2. Level 3
    • RS: EN61000-4-3. Level 2
    • EFT: EN61000-4-4. Level 2
    • Surge: EN61000-4-5. Level 3
    • CS: EN61000-4-6. Level 2
    • Voltage Dips EN61000-4-11
    • Harmonic: EN61000-3-2
  • Isolation Test -
    • Primary to Secondary: 4242 VDC for 1 minute
    • Primary to Field Ground: 2121VDC for 1 minute
    • Output to Field Ground: 2121VDC
  • IEEE 802.3af/at Interoperability - If 25kohm is detected the unit operates in ™IEEE802.3at mode™ 33.6W 2 pair powering. 12.5k detection resistance required for full power
  • Insulation Resistance - Primary to Secondary: >10M OHM 500VDC/Primary to Field Ground: >10M OHM 500VDC
  • Cisco Legacy Detection - No external parts required for Legacy devices.
  • Short Circuit Protection - Outputs equipped with short circuit protection and overload protection.
  • Input Connector - IEC320 inlet 3 pin
  • Weight - 0.5 Kg
  • Size - 166mm x 80 x 44
  • Warranty - 1 Year

POE75U-1UP Specifications PDF


Product Reviews

Write your own review

 

Rate this product: