The cart is empty.
Dealers. First. Always.
DWG

POE240U-2MPN Phihong 2 Port 95W per Port Power over Ethernet

SKU: POE240U-2MP-N
  • Features:
    • Fully Compliant detection, disconnect and voltage control IEEE802.3af
    • Proprietary Detection, Disconnect and Overload Protection
    • Gigabit Compatible
    • Full Protection OCP, OVP
    • Full Power at 95W per port
    • Limited Power Source
    • Diagnostic LED
    • SNMP Management
More details...
MSRP Price: $772.00
Save to my Wish List

DWG Dealer Price : ---


Dealers - click here to set up your dealer account today.

Existing DWG Customers - Log In to view your current dealer pricing.



Previous Item   Next Item
Product Details
  • AC Input Voltage Range - 90 to 264VAC
  • Input Frequency - 47-63 Hz
  • Input Current - 5A (RMS) maximum for 90VAC, 2.5A (RMS) maximum for 230VAC
  • AC Input Voltage Range - 85 to 264VAC
  • Leakage Current - 3.5mA maximum at 254VAC 60Hz
  • AC Inrush Current - 30A (RMS) maximum for 115VAC, 60A (RMS) maximum for 230VAC
  • Total Output Power - 95W per port at 56V+1/-2
  • DC Offset - No Data degradation with DC imbalance 18mA per min.
  • Ripple and Regulation - 250mV maximum
  • Efficiency - 75% (typical) at maximum load, and 120VAC 60Hz
  • Hold Up Time - 10mS minimum 120VAC and maximum load
  • Turn On Delay Time - 20 sec maximum at maximum load, and 120VAC 60Hz, 25Hz
  • Transient O/P Voltage Protection - 60V maximum at switch on and off at any AC line Phase
  • Temperature -
    • Operation: 0 to +40°C
    • Non-Operation: -25 to +65°C
  • Humidity Operation - 5 to 90%
  • EMC - EN55022 Radiate Class A/ EN55022 Conducted Class B
  • Immunity -
    • ESD: EN61000-4-2. Level 3
    • RS: EN61000-4-3. Level 2
    • EFT: EN61000-4-4. Level 2
    • Surge: EN61000-4-5. Level 3
    • CS: EN61000-4-6. Level 2
    • Voltage Dips EN61000-4-11
    • Harmonic: EN61000-3-2
  • Isolation Test -
    • Primary to Secondary: 4242 VDC for 1 minute
    • Primary to Field Ground: 2121VDC for 1 minute
    • Output to Field Ground: 2121VDC
  • IEEE 802.3af Interoperability - If 25kohm is detected the unit operates in “IEEE802.3at mode” 33.6W 2 pair powering. 12.5k detection resistance required for full power
  • Insulation Resistance - Primary to Secondary: >10M OHM 500VDC/Primary to Field Ground: >10M OHM 500VDC
  • Cisco Legacy Detection - No external parts needed for Legacy devices
  • Short Circuit Protection - Outputs equipped with short circuit protection and overload protection as per 802.3af specifications except max average pair current is 0.72A, Peak 1.4A per pair. The output can be shorted permanently without damage.
  • Over Temperature Protection - Auto-shutdown without damage.
  • Input Connector - AC Input IEC320 3 pin
  • Weight - 3.5 lb
  • Size - 225mm x 200 x 48.5
  • Warranty - 1 Year

POE240U-2MPN Specifications PDF


Product Reviews

Write your own review

 

Rate this product:


DWG - 800 Shames Drive , Westbury , NY 11590 , USA - 516-933-4900
Connect with us on Social Media   Facebook   Instagram   Twitter   Linked In