The cart is empty.
Dealers. First. Always.
DWG

POE240U-4UP-N Phihong 4 Ports 60W per Port Power over Ethernet Ultra

SKU: POE240U-4UP-N
  • Features:
    • Fully Compliant Detection, Disconnect and voltage control
    • Rack Mountable in single or double units
    • Limited power source
    • Low Cost
    • Gigabit Compatible
    • SNMP management
More details...
MSRP Price: $682.00
Save to my Wish List

DWG Dealer Price : ---


Dealers - click here to set up your dealer account today.

Existing DWG Customers - Log In to view your current dealer pricing.



Previous Item   Next Item
Product Details
  • AC Input Voltage Range - 90 to 264VAC
  • Input Frequency - 47-63 Hz
  • Input Current - 5A (RMS) maximum for 90VAC, 2.5A (RMS) maximum for 230VAC
  • Leakage Current - 3.5mA maximum at 254VAC 60Hz
  • AC Inrush Current - 30A (RMS) maximum for 115VAC, 60A (RMS) maximum for 230VAC
  • Total Output Power - 60W per port at 56V+1/-2, Total power on all ports 240W
  • Ripple and Regulation - 250mV maximum
  • Efficiency - 75% (typical) at maximum load, and 120VAC 60Hz
  • Hold Up Time - 10mS minimum 120VAC and maximum load
  • Transient O/P Voltage Protection - 60V maximum at switch on and off at any AC line Phase
  • Turn On Delay Time - 20 sec maximum at maximum load, and 120VAC 60Hz, 25Hz
  • Temperature -
    • Operation: 0 to +40°C
    • Non-Operation: -25 to +65°C
  • Humidity Operation - 5 to 90%
  • EMC - EN55022 Radiate Class A, EN55022 Conducted Class B
  • Immunity -
    • ESD: EN61000-4-2. Level 3
    • RS: EN61000-4-3. Level 2
    • EFT: EN61000-4-4. Level 2
    • Surge: EN61000-4-5. Level 3
    • CS: EN61000-4-6. Level 2
    • Voltage Dips EN61000-4-11
    • Harmonic: EN61000-3-2
  • Isolation Test -
    • Primary to Secondary: 4242 VDC for 1 minute
    • Primary to Field Ground: 2121VDC for 1 minute
    • Output to Field Ground: 2121VDC
  • Insulation Resistance - Primary to Secondary: >10M OHM 500VDC, Primary to Field Ground: >10M OHM 500VDC
  • IEEE 802.3af Interoperability - If 25kohm is detected the unit operates in “IEEE802.3at mode” 33.6W 2 pair powering. 12.5k detection resistance required for full power
  • Cisco Legacy Detection - No external parts needed for Legacy devices.
  • Short Circuit Protection - Outputs equipped with short circuit protection and overload protection as per 802.3af specifications. The output can be shorted permanently without damage.
  • Over Temperature Protection - Auto-shutdown without damage.
  • Input Connector - AC Input IEC320 3 pin
  • Weight - 3.5 lb
  • Size - 225mm x 200 x 48.5
  • Warranty - 1 Year

POE240U-4UPN Specifications PDF


Product Reviews

Write your own review

 

Rate this product:


DWG - 800 Shames Drive , Westbury , NY 11590 , USA - 516-933-4900
Connect with us on Social Media   Facebook   Instagram   Twitter   Linked In