POE60S-4AF Phihong 5 Port PoE Switch Powered by ULTRA PoE Extends Ethernet Data and PoE

• Input - The PoE Extender can receive power from the network switch or midspan. An optional DC power adapter is also available.
• DC Input Voltage Range - 36-57VDC
• DC Input Current - 3.0mA at 36VDC at maximum load, 2.0mA at 57VDC at maximum load
• Ripple and Regulation - 250mV maximum
• Efficiency - 84% (typical) at full load and 48VDC
• PoE standard compliance -
• input: 12.5K Internal Signature Resistance
• output: Detects a 25K Signature Resistance
• Temperature -
• Operation: 0 to +55°C
• Non-Operation: -20 to +71°C
• Humidity Operation - 5 to 90%
• EMC - EN55022 Class B/ FCC Part 15, Class B
• Cable - Designed to operate up to 100 meters per IEEE 802.3, Cat 5 or Cat 6
• Immunity -
• ESD: EN61000-4-2. Level 3
• RS: EN61000-4-3. Level 2
• CS: EN61000-4-6. Level 2
• Isolation Test -
• Input to Field Ground: 2121VDC for 1 minute
• Output to Field Ground: 2121VDC for 1 minute
• Isolation - Input and output are isolated from chassis ground
• Short Circuit Protection - Outputs equipped with short circuit protection and overload protection as per 802.3at specification
• Insulation Resistance - Input and Output to field ground: >10 OHM 500VDC
• Input and output data Connector - RJ45
• Optional DC Input Connector - Center Positive Barrel 9mm x 2.5mm ID x 5.5mm OD
• Weight - 2 lb.
• Size - 174mm x 154 x 38
• Warranty - 1 Year

POE60S-4AF Specifications PDF