PA-4810 TAKEX Passive IR Sensor 40' Wide Angle, Quad Elemet, Fuzzy Logic, PIR Sensor - N/O N/C Relay

Specifications

• Detection - Passive infrared (Quad : Fuzzy logic)
• Coverage - Wide Angle 12m(40') Max
• Number of sensitive zone - 18 pairs (72)
• Mounting positions - Indoor wall / pillar
• Supply voltage - 9.5 to 28 VDC (non-polarity)
• Power consumption - 25mA Max
• Alarm output - Dry contact relay (N.O., N.C. selectable) Reset : approx. 2sec 30VDC (24VAC), 0.25A Max resistive load (protective resistance 3.3Ω)
• Temper Signal - Dry contact (N.C.) Open when cover is detached 30V・0.1A Max resistive load
• Fine Motion Detection - 36 pairs
• Alarm LED - Red LED Warm up : flickering (every 0.5 sec.) Alam : solid (approx. 2 sec.) Memory : continuous solid, Trouble alam : continuous solid (LED disable)
• Alarm Memory - 3 min-Flickering, 47 min-Lighting
• LED Control - Controls alarm LED indication with terminal L/C
• Trouble alarm - Unit monitors damage on inner circuitry / wiring (Operate : initiate trouble alarm) Low power voltage : monitors drop in power voltage (Operate : initiate trouble alarm) Failure to replace : monitors failure to replace head unit (Operate : initiate trouble alarm)
• Ambient temp. range - -10°C to +50°C(+14°F to +122°F) without condensation
• Wiring - Terminals
• Weight - 165g (5.82oz.)
• Adjustment - Vertically : 20°, Horizontally : ±5°
• Accessory - Fixing screw : 4 × 30 2pcs.

PA-4810 Specifications PDF