MS-12FE TAKEX 2 Sets MS-12TE, ±90° Horizontal Adjustment Each Head . AND/OR OperationRelay, Output - Selectable N/O N/C, 12 to 30VDC

With up to 12m x 180˚ range these sensors are perfect for use in both domestic and industrial applications.

Specifications

• Detection System - Passive infrared
• Coverage - 2sets of MS-12TE sensor
• Coverage adjustment - Horizontal : ±90°, Detection distance : 6.6' to 40' (2 to 12m), (By adjusting vertical angle of downward zone)
• Supply voltage - 12 to 28V DC (non-polarity)
• Current consumption - 40mA MAX.
• Alarm output - Dry contact relay output N.C. /N.O. selectable Contact capacity : 30V (AC・DC), 0.25A MAX. (Resistive load), Contact operation : Detection time + off delay(2sec)
• Tamper output - Dry contact relay output N.C. Contact capacity : 30V (AC/DC), 0.1A MAX. (Resistive load)
• Operation LED - Red LED, Blinking at warming up (LED disabled), Lighting at alarm (LED disabled)
• Pulse count settings - once / three times (with a switch)
• Sensitivity adjustment - Approx. 30% (L) - Approx. 170% (H) (By potentiometer)
• Detection mode - AND / OR selectable
• Connection - Terminals
• Ambient temperature - －4°F to ＋122°F (－20°Cto ＋50°C）
• Mounting position - Indoor / Outdoor
• Weight - 16.5oz (470g)
• Appearance - Body : AES resinLens : PE resin
• Accessory - Tapping screw : 2 Area masking sheet : 2

MS-12FE Specifications PDF