PIR-50NE TAKEX 165' Long range pattern with mounting height of 11.5', Mirror Optic,Indoor/Outdoor, 12V

With a mounting height up to 3.5m coupled with a creep zone of less than 1m, we can offer 30m x 30m high-density coverage (PIR-30WE) or 50m x 3m curtain coverage (PIR-50NE). Using the highest quality mirrored optics coupled with twin pyros, TAKEX offer the most professional long-range outdoor PIR’s to date.

Specifications

• Detection System - Passive infrared
• Coverage - Vertical Curtain 50m (165') Max. 12 Zones(24 beams)
• Coverage adjustment - Vertical : 10°, Horizontal : ±5°
• Mounting position - Indoor or outdoor wall
• Supply voltage - 9 to 30V DC (non-polarity)
• Current consumption - 35mA Max.
• Alarm output
  • Dry contact(semi-conductor) output (N.C./N.O.)
  • 24V (AC/DC) 0.25A (resistive load) (protective resistor 3.3Ω)
  • Warm up : Approx.1min.(No alarm condition)
  • One-shot output at detection (Approx.2sec.)
  • Continuously output when detecting low supply voltage
• Tamper output
  • Dry contact output : (N.C.)
  • 24V (AC/DC) 0.1A (resistive load)
  • Cover tamper output : Real time output
  • Tilt switch output : Off delay output(Min. 2sec.)
• Alarm LED
  • Red LED
  • Blinks during warm up (Approx. 1min.)
  • One shot lights (Approx. 2sec.) at detection
  • Continuously lights when detecting low supply voltage
• Functions
  • Low supply voltage alarm
  • Tamper signal : Cover tamper / Tilt switch
  • LED control(L/C)
  • Alarm LED(ON/OFF)
  • Sensitivity adjustable between 30% and 170%
• Ambient temperature range - -20°C to +50°C(+4°F to +122°F) without condensation
• Wiring - Terminals
• Weight - 56oz(1,600g)
• Appearance - Body : AES resin , Cover : PE resin
• Accessories - Water-proof grommet : 1pce, tapping screw : 2pcs

PIR-50NE Specifications PDF

PIR-50NE Manual