FS-1000E TAKEX 33' Ultraviolet Flame Sensor

The FS-1000E sensor quickly detects ultraviolet rays contained in flames and activates a built-in alarm sound plus an open collector output.

Specifications

• Model No. - FS-1000E
• Detection system - Ultraviolet rays detection (Detected wave length 180~260nm)
• Detection distance - 33ft. (10m) (2.76"(7cm) lighter flame, in front)
• Detection angle - Approx. 120 ̊(conically)
• Sensitivity adjustment - Detection sensitivity (H [100%], L [50%]), Detection timer (1sec., 6sec., 15sec., 30sec.)
• Power supply - Type-3 alkaline battery (LR6)×2 (3V) ...accessory, Exclusive lithium battery (CR17450E-R-2-CM2)×1 (3V) ...optional, External power supply 9VDC to 30VDC with polarity
• Power consumption - Stand by: 50μA Max. when battery power supply, 5mA Max. when external power supply, Alarm: 50mA Max. when buzzer sounds
• LED - Indication: Red LED, Alarm: Flashing every 0.2sec. during off-delay approx. 10sec., Low battery: Light on 0.1sec. every approx. 5sec
• Buzzer - Alarm: Sounds intermittently every 0.2sec. during off-delay 10sec., Low battery: Sound 0.1sec. intermittently every approx, 5sec., Volume: 80dB or more 3.3ft. (1m) ahead (Silent setting is available by cutting internal jumper line)
• External output - NPN open collector output (Useful as an output with voltage when external power is used) 30V (DC) 50mA, off-delay 10sec. continuous output
• Wiring - Terminals
• Ambient temp. range - +14 ̊F to +140 ̊F (−10 ̊C to +60 ̊C) without condensation Battery performance may decrease under +32 ̊F (0 ̊C) or beyond +104 ̊F (+40 ̊C)
• Installation - Indoor (Ceiling or wall mount)
• Weight - Approx. 7oz (200g) including battery (accessory) 1.8oz (50g)
• External dimensions - I4.72" (120mm)×H1.57" (40mm)
• Appearance - ABS resin (white)
• Accessories - Exclusive battery case of Type-3×2pcs, ×1, Type-3 alkaline battery LR6×2, Sensor locking screw I3×6, ×1, Tapping screw I4×25, ×2

FS-1000E Specifications PDF