PVW-12TE TAKEX 40' x 40' PIR Sensor Speaker with Recordable Messages 12-30VDC

The PVW-12TE is a sensor speaker which detects passive infrared emitted from human beings and triggers 2 different messages depending on Day/Night or control input settings.

Specifications

• Description - Sensor Speaker
• Model - PVW-12TE
• Detection system - Passive infrared
• Coverage - Horizontal coverage Max. detection ofostance: 40 (12m) Detection angle: 90°, Horizontal detection zone: 7 zones, Downward Detection angle: 7 zones
• Adjustment range - Horizontal: ±90 of line adjustment is available) Detection distance: 10' to 40 (3 to 12m) (By adjusting vertical angle of downward curtain)
• Supply voltage - 10 to 30VDC (Non polarity)
• Current consumption - 55mA MAX. for standby 300mA MAX. for operation (When Max. volume)
• ARM/DISARM input
  • N.O.M.C. selectable with a switch, N.O.: Armed when closed, N.C.: Armed when opened
  • Response time: 300msec or longer
  • Input resistance: 1k Ω or less
• Replay input
  • N.O/N.C. selectable with a switch, N.O.: Armed when closed, N.C.: Armed when opened
  • Response time: 30Omsec or longer
  • Input resistance: 1k Ω or less
• Day light control - Recognized as night when the illuminance of the surrounchng area is lower then the set illuminance
• Contact output - Dry contact relay output N.O./N.C. selectable with a switch Contact capacity: 30V (AC/DC), 0.5A MAX. Contact operation: One Shot operation Approx. 2sec.
• Sound output - Replay the two different messages through the built-in speaker Operation: off delay operation Repeat sounds during detection time + Approx. 2sec. to 5min. Output sounds: [Message 1] and (Message 2] (Max 8sec. each) Sound volume adjustment: 80dB Max. Reconing method: Built-in microphone or Jack Input
• Operation LED - Red LED Blinks for warming-up - LED can be disabled with a switch. Lights for detection - LED can be disabled with a switch. Fast blinks for recording standby Lights for recording (Max. 8sec.)
• Tamper output - Dry contact relay output: NC Capacity: 30V (AC/DC), 0.5A MAX
• Pulse count settings - Once / Three times (Selectable with a switch)
• Sensitivity adjustment - 30% to 170% (By pmemlometer)
• Connection - Terminals
• Ambient temperature - -4°F to + 122°F(-20°C to + 50°C)
• Mounting Position - Indoor Outdoor (Rain-proof)
• Weight - 16.8 oz (480g)
• Apperance - Body: AES resin Lens: PE resin

PVW-12TE Specifications PDF