DTMRX224 VIDEOTEC Telemetry receiver 12 functions, RS485/RS232/over the coax, 24VAC

The DTMRX2 is a digital receiver, controlled by a microprocessor, for remote control of a Pan & Tilt motor and a motor-driven zoom lens. The DCT, DCJ, DCTEL, DCIR and SM matrix series control units ensure complete control of all the DTMRX2 functions. It is also interfaced to a PC through RS232. Connection to the control unit can be RS232, RS485 or over Coax cable (in this case, the connection to the matrix distance can reach up to 350 m). A IP56 weatherproof box ensures protection against all weather conditions. It is available in 24 V ~ or 230 V ~ versions for Pan & Tilt motors, and allows feeding common ground or polarity inversion zoom lenses. A relay auxiliary function is available for controlling, for instance, the switching on of an IR illuminator, through a power contact or the control of the wiper. Four PG11 cable glands make connections easier.

• 12 Functions - UP, DOWN, LEFT, RIGHT, AUTO, ZOOM TELE, ZOOM WIDE, FOCUS NEAR, FOCUS FAR, IRIS OPEN, IRIS CLOSE, AUX
• 99 identification addresses, selectable by dip switch
• Serial communication selectable between RS232, RS485 and Over Coax
• Ability to use both polarity inversion lenses and common wire lenses
• EEPROM for storing activated functions
• LED indicating power supplied to the unit
• LED indicating command reception
• LED indicating data reception
• Supplied with: instruction manual, 2 PG11 blanking caps, 4 wall mounts with relevant fastening screws
• Plastic material enclosure
• 4 PG11 cable glands
• Dimensions - 225x154x81 mm (8.85x6.06x3.18 in)
• Power supply - 24V~ 50/60Hz
• Power consumption - 10W
• Max swichtable power - 100W
• Power supplied to the positioning device - 24V~ 50/60Hz
• Power supplied to the lens - from 3 to 14V= max 100 mA
• AUX - auxiliary dry contact 1A 24V
• Protection fuses - F1: F 2,5 A L 250V

DTMRX224 Specifications PDF