Dealers. First. Always.       |      The professional integrators favorite security distributor for over 20 years and counting.
DWG



Popular Everyday Products

1113225 Potter VSR-F-EX-2.5 2.5 Inch Explosion Proof Flow Switch

SKU: 1113225
  • Model Number: VSR-F-EX-2.5
  • Item Number: 1113225
More details...
Ordering Notes: Dealers Only
MSRP Price: $2,729.50


DWG Dealer Price : ---


Dealers - click here to set up your dealer account today.

Existing DWG Customers - Log In to view your current dealer pricing.



1113225 Potter VSR-F-EX-2.5 2.5 Inch Explosion Proof Flow Switch
1113225 Potter VSR-F-EX-2.5 2.5 Inch Explosion Proof Flow Switch
Previous Item   Next Item
 
Product Details
  • The 2.5" (50mm) device requires a hole with a diameter of 1 1/4" + 1/8" - 1/16" (33mm 2mm).

The Model VSR-FEX is a vane type waterflow switch for use on wet sprinkler systems located in hazardous locations as shown above. The unit may also be used as a sectional waterflow detector on large systems. The unit contains two single pole, double throw, snap action switches and an adjustable, instantly recycling pneumatic retard. The switches are actuated when a flow of 10 gallons per minute (38 Lpm) or more occurs downstream of the device. The flow condition must exist for a period of time necessary to overcome the selected retard period.

  • II 2 G Ex d II B T6
  • II 2 D Ex tD A21 IP 66 T85C
  • Service Pressure - Up to 450 PSI (31 BAR )
  • Minimum Flow Rate for Alarm - 10 GPM (38 Lpm)
  • Maximum Surge - 18 FPS (10 m/s)
  • Contact Ratings:
    • Two sets of SPDT (Form C)
    • 15.0 Amps at 125/250 VAVAC
    • 2.0 Amps at 30 VD C Resistive
  • Conduit Entrances:
    • Two conduit entrances provided for " conduit with " NPT threaded connections
  • Environmental Specifications - For use in hazardous locations, Classified as:
    • Class I: Groups C, D, Div. 1
    • Class II: Groups E, F, G, Div. 1
    • Class III: Div. 1
  • Suitable for indoor or outdoor use with factory installed gasket and cast aluminum housing
  • NEMA 4 Rated Enclosure - use with appropriate conduit fitting
  • Temperature: 40F/120F, 4,5C/49C
  • Non-corrosive sleeve factory installed in saddle

1113225 Specifications PDF


Product Reviews

Write your own review

 

Rate this product: