[DISCONTINUED] HLF-20 Pulseworx - Powerline Wire-In Filter, 20 Amps

The HLF-20 Powerline Filter is a wire-in device designed to reduce electrical noise generated by certain electrical devices from reaching the powerline which might interfere with PulseWorx products’ ability to communicate with one another.
The HLF-20 is designed to be wired-in with an ouput load for heavy duty electronic appliances like variable speed pool motors. The HLF-20 is rated for 120/240/208VAC heavy duty electrical devices that draw 20 amps or less. When used on a 120V device Line 2 becomes the Neutral wire. When used on a 208/240V device Line 2 is wired to the second line.

Specifications

ELECTRICAL

• Power Requirements - 120/240/208VAC 60Hz
• Connections/Power Wire
  • Four wires (105ºC insulation)
  • Green - Ground (16awg)
  • Black - Line 1 (12awg)
  • Yellow - Netural or Line 2 in 208/240V situations (12awg)
  • Red - Load (12awg)
• Environmental Conditions
  • Indoor Use Only or water-proof enclosure next to circuit breaker panel
  • Temperature: -40° to 194°F (-40° to 90°C)
  • Humidity: 10% to 90% RH (non-condensing)

OPERATION

• Status LED Modes - None
• LED Indicators - None
• During Power outage - Power cuts off, ON/OFF switch with 20A fuseSet-Up Mode - None required

MECHANICAL

• Button Type - None
• Mounting - Wired
• Dimensions - Height: 8.0 in Width: 4.0 in Depth: 2.0 in
• Weight - 4.5 lbs
• Warranty - 5 years