NV-215J-M NVT Single Channel Passive Video Transceiver RJ45

The NVT Model NV-215J-M Video Transceiver is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.
The passive NV-215J-M has a 9" mini-coax pigtail lead which allows in-camera enclosure mounting in most dome cameras and a RJ45 for connection to UTP wire. It is capable of delivering a fully equalized signal to the DVR when used with any Active NVT Receiver, yet is compatible with all of NVT’s passive products for applications under 750ft (225m). The NV-215J-M Video Transceiver also incorporates improved transient protection that eliminates the need for a ground screw.
The unparalleled interference rejection and low emissions of the NV-215J-M allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant.

Specifications

Video

• Frequency response - DC to 10 MHz
• Attenuation - 0.5 dB typ
• Common-mode / Differential-mode rejection
  • 15 KHz to 5 MHz - 60 dB typ
• Impedance
  • Coax, male BNC - 75 ohms
  • UTP, RJ45 - 100 ohms

Power

• No external power required

Environmental

• Ambient ambient temperature - -22 to +167 °F (-30 to +75 °C)
• Humidity (non-condensing) - 0 to 95%
• Transient Immunity - per ANSI / IEEE 587 C62.41

Wire Type

• Network Wiring - One Unshielded Twisted Pair 24-22 AWG (0,5-0,64mm)
• Category Type - 2 or better
• Impedance - 100 ± 20 ohms
• DC Loop Resistance - 52 ohms per 1,000ft (18 ohms per 100m)
• Differential Capacitance - 19 pF/ft max (62 pF/m max)

Mechanical

• Body Length - 1.8in (45mm)
• Body Height -1.0in (26mm)
• Body Width - 1.65in (42mm)
• Product Weight - 2.0oz (60g)
• Packaged Weight - 0.14lb (63g)

NV-215J-M Specifications PDF