NV-32PS42-PVD NVT 32-Channel Power Supply StubEQ Active Receiver Hub

The 32-channel NV-32PS42-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building wiring. Designed for installation in the IDF/Telecom Closet or MDF/Equipment Room, Power Supply StubEQ™ Active Receiver Hubs have individual floating 28VAC outputs that support at-distance camera loads up to 0.5 Amp per channel for cable runs up to 1,500ft (460m). A built-in StubEQ™ video receiver hub ensures a zero loss video signal for connection into a DVR or IP encoder. Standard features include: automatic-reset fault protection, transient protection, ground loop free individually floating outputs and per-channel diagnostics. All NVT products are UL and cUL listed, are compliant with CE, RoHS, WEEE, and come with NVT’s lifetime warranty.

Specifications:

• Model Number - NV-32PS42-PVD
• Frequency response - DC to 10 MHz
• Attenuation - 0.5 dB typ
• Common-mode / Differential-mode rejection 15 KHz to 5 MHz - 60 dB typ
• Impedance Coax/UTP - 75/100 ohm
• Network Wiring - One four-pair Category cable
• Power Supply - Fully isolated (floating) 28 VAC Class 2 SELV output at up to 0.5 Amp
• Voltage - 115 / 230 VAC
• Current - 5.0 / 2.5 Amps
• Wattage - 500 Watts
• Heat - 325 BTU/hour
• Ambient Temperature - -4 to +122 °F (-20 to +50 °C)
• Minimum airflow - 4ft3/min (0,1m3/ min)
• Humidity (non-condensing) - 0 to 95%
• Transient Immunity - per ANSI 587 C62.41
• Dimensions - 19in wide, 1.73in high, 12in deep
• Weight - 40lb (18,14kg)
• Mounting - Rack mount “L” brackets for front, rear, or wall installations: rubber feet for desk installation
• Cables - Thirty-two 2ft (60cm) coax jumpers, Molded IEC power inlet cord 7ft (200cm)

NV-32PS42-PVD Specifications PDF