FDVA1-DB1-IB1-M1R-MSA KBC 1 Channel 8-bit Point-to-Point Video Transmission with Bi-Dir. Data & Contact Closure - Multimode Receiver

The KBC FDVA-DB1-IB1 series uses the most advanced digital technologies to provide excellent repeatable performance for today’s CCTV systems. It supports transmission of one analog composite video channel, with one bi-directional data channel and one bi-directional contact closure signal over one multimode or singlemode optical fiber. PAL, NTSC and SECAM video standards are fully supported and the data channel supports all standard PTZ (Pan-Tilt-Zoom) control signals. The plug-and-play design ensures ease of installation with no electrical or optical adjustment needed. LED indicators are provided to clearly show the operational status of the unit. The series is available in compact or 3U chassis card.

• Model Number - FDVA1-DB1-IB1-M1R-MSA
• No. of Channels - 1
• Input/Output - 1.0V pk-pk typical, 75Ω
• Bandwidth - 5 Hz ~ 6.5 MHz
• Digital Encoding (non compressed) - 8 bit
• Differential Gain (10-90% APL) - <2.0%
• Differential Phase (10-90% APL) - <2.0°
• SNR - >60dB
• Data Formats - RS232, RS422, RS485 (2W & 4W)
• Number of Two-way Channels - 1
• RS232 Data Rate - DC – 115.2 kbps
• RS422/485 Data Rate - DC – 250 kbps
• Bit Error Rate - <1 x 10-12
• Encoding Schemes - Manchester, Bi-Phase, NRZ, NRZI
• No. of Contact Closure Channels - 1 Duplex
• Response Time - 500μs
• Input - Dry Contact Closure, TTL
• Output - SPST Relay, Normally Open
• Switch Rating - 1A @ 30 Vdc 0.5A @ 125 Vac max
• Optical Wavelength- 1310nm / 1550nm
• Fiber Type - Multimode
• Number of Fibers - 1
• Power Input - 12-24 Vac/dc @ 200mA
• Operating Temperature - -40°~+70°C / -40°~+158°F
• Operating Humidity - 0 to 95% non-condensing
• Dimensions - 70mm x 61mm x 44mm (2.8” x 2.4” x 1.7”)
• Video - BNC 75Ω
• Fiber Connector - ST
• Power - Screw Block Terminal

FDVA1-DB1-IB1-M1R-MSA Specifications PDF