ADACSNETD American Dynamics Matrix Distribution Panel - Power Supply Sold Separately

The SensorNet/Manchester distribution panel amplifies either a SensorNet or Manchester protocol signal for multi-point dome control which provides the flexibility to operate efficiently in either protocol setting. With 16 output driver links (two connectors per link), the panel can accommodate home-run dome wiring, multiple daisy-chained links to domes, or J-Boxes.
The panel also includes inputs for two hosts allowing you to maintain a connection between both the primary and backup CPUs and the devices connected to the panel, thereby providing a redundant solution1. For the ultimate control, you can monitor signal activities on each channel.

Specifications

Physical

• Dimensions (L x W x D) - 481 x 87 x 34 mm (18.9 x 3.4 x 1.3 in)
• Body Length - 445 mm (17.6 in)
• Weight - 0.75 kg (1.66 lbs)
• Mounting - Standard electrical rack (2U), EIA-310-D (19 in) IEC 60297-1 (482.6 mm) Wall mount

Electrical

• Power Source - External power module Certified limited power source required Multiple panels may be connected up to themaximum VA rating of the transformer
• Input - 12 to 30 V DC or AC Isolation not required NEC Class 2
• Power Consumption - 8 VA
• Diagnostic Indicators
  • Power On/Heartbeat - Green LED
  • Noise Detect - Red LED
  • Host A and B Receive Data - ellow LED
  • Channels 1-16 Receive Data - Yellow LED
  • Protection - Internal primary current fuse Inrush limiting DC isolation
  • Cable to Transformer - 5 m (16.5 ft) 18 AWG (0.823 mm2), 3-conductor
  • Input Connector - Euro-style 3-pin removable plug 5.06 mm (0.2 in) terminal block
• Surge Protection
  • Transient Voltage Suppressors (TVS) - 60 V, 250 A, 1.5 J
  • Gas discharge tube impulse rated - 10 kA
• Design Tolerance
  • Input Voltage Minimum - 11 V DC or AC without drop out
  • Input Voltage Maximum - >36 V DC or AC
  • Input Frequency - 47 to 63 Hz
  • Allowable Dropout - 150 ms

Surge Protection

• Transient Voltage Suppressors (TVS)
  • Breakdown Voltage - 7.6 to 9.3 V DC
  • Peak Current - 40 A
  • Capacitance - 2000 pf at 1 kHz
• Gas Discharge Tube Impulse Rate
  • DC Breakdown Voltage - 90 V DC
  • Insulation Resistance - 10,000 mΩ
  • Capacitance - 2 pf max
• 8/20 μsec Impulse Discharge
  • Current - 10 kA
• Ten 8/20 μsec Impulses
  • Discharge Current - 5 kA
• Isolation Transformer
  • Coupled - 2000 Vrms PTC re-settled fuse protects transformer

Environmental

• Operating Temperature - -10° to 50°C (14° to 122°F)
• Storage Temperature - -40° to 70°C (-40° to 158°F)
• Relative Humidity - 0 to 95% noncondensing

Regulatory

• EMC
  • 47 CFR, Part 15
  • EN50130-4; EN55022
  • EN61000-3-2; EN61000-3-3
  • CISPR22
• Safety - UL/IEC/EN/CSA C22.2.60950-1
• Environmental
  • RoHS 2002/95/EC
  • WEEE 2002/96/EC
  • IP code X0

ADACSNETD Specifications PDF