The Model XT-1H 1-Channel Handheld Mid-range Transmitter is designed for use in various wireless remote control applications. When activated, the XT-1H portable transmitter will send a 2 watt, 27.255 MHz, digital encoded, FSK modulated, signal to their companion receiver. The receiver will verify the digital code, activate its output, and trigger the remote device.
The Model XT-1H is a one-button, single channel transmitter. Each transmission is limited to a maximum of 30 seconds duration.
The XT-1H portable transmitter is powered by two 9-volt alkaline batteries in series, supplying 18 volts. During transmissions, the red operation indicator will light (visible through a window next to the antenna). If the transmitter™s battery voltage is low, the indicator will blink during transmissions. The XT-1H transmitter has battery supervision capabilities. If the combined battery voltage drops below 12 volts, a low battery message will be included with any signal transmitted, causing the receiver™s low battery output to activate. The test button next to the indicator sends a test transmission when pressed.
Two 8-position switches set the unit™s system code. This code must be matched in the transmitter™s companion receiver. There are 65,536 different system codes possible. The 4-position option switch selects the transmitter™s channel and the receiver™s bank (for the XR-16 receiver only).
Each transmitter is provided with a 6-inch rubber duck antenna and a removable belt clip.
SNT00395 Spec Sheet
SNT00395 Installation Manual
Product Reviews
Write your own review
Rate this product: