The cart is empty.
Dealers. First. Always.
DWG

AL602ULADAJ Altronix NAC Power Extender w/ Large Enclosure 24VDC @ 6.5Amp

SKU: AL602ULADAJ
  • AL602ULADAJ are extremely cost effective voltage regulated remote NAC Power Extenders.
  • They may be connected to any 24 volt Fire Alarm Control Panel (FACP).
  • Primary applications include Notification Appliance Circuit (NAC) expansion (supports ADA requirements) and providing auxiliary power to support system accessories.
More details...
Ordering Notes: Dealers Only
MSRP Price: $730.00
Online Price: $521.00
Save to my Wish List

DWG Dealer Price : ---


Dealers - click here to set up your dealer account today.

Existing DWG Customers - Log In to view your current dealer pricing.



Previous Item   Next Item
Product Details

Specifications


Input

  • Voltage - 120VAC, 60Hz, 4A.
  • Two (2) Class A, Style Z or two (2) Class B inputs.
  • Two (2) NC dry contact trigger inputs.

Outputs

  • Voltage - 24VDC power-limited outputs.
  • Current
    • 6.5A max. total alarm current.
    • 2.5A max. current per output.
  • Two (2) outputs may be paralleled for more power on an indicating circuit.
  • Auxiliary - 1A.
  • Other
    • Thermal and short circuit protection with auto reset.
    • Filtered and regulated outputs.
  • Programmable Supervised Indicating Circuit Outputs - Four (4) Class B, or Two (2) Class A, or One (1) Class A and Two (2) Class B.

Back-up Battery (not included)

  • Type - Sealed lead acid or gel type.
  • Failover - Upon AC loss, instantaneous.

Supervision

  • AC Failure - Form “C” contacts.
  • Low Battery - Form “C” contacts

Indicators (LED)

  • AC Power (Green) - Input voltage is present.
  • DC Output (Red) - Powered.
  • Logic Board (Red and Green) - Output status.

Agency Listings

  • UL - UL864 (Control Units and Accessories for Fire Systems).
  • MEA - NYC Department of Buildings Approved.
  • FM - Factory Mutual Approved.
  • CSFM - California State Fire Marshal Approved.

Special Features

  • 2-wire horn/strobe Sync mode allows audible notification appliances (horns) to be silenced while visual notification appliances (strobes) continue to operate.
  • Sync protocols include Potter/Amseco, Faraday, Gentex, System Sensor, and CooperWheelock.
  • Temporal Code 3, Steady Mode, Input to Output Follower Mode (maintains synchronization of notification appliances circuit).
  • Compatible with 12VDC or 24VDC fire panels.
  • Output loop supervision steered to input 1 or input 2.
  • Signal circuit trouble memory (helps identify intermittent loop problems).
  • Common trouble input and output for external trouble signals tie-in.
  • Ground fault detection.

Physical and Environmental

  • Dimensions (H x W x D) - 18” x 14.5” x 4.625” (457.2mm x 368.3mm x 117.48mm). Enclosure accommodates up to two (2) 12VDC/18AH batteries.
  • Product Weight - 16.65 lbs. (7.55 kg).
  • Shipping Weight - 18.9 lbs. (8.57 kg).
  • Temperature
    • Operating - 0ºC to 49ºC (32ºF to 120ºF).
    • Storage - -20ºC to 70ºC (-4ºF to 158ºF).
  • Relative Humidity - 85% +/-5%.
  • BTU/Hr. (approx.) - 31 BTU/Hr

AL602ULADAJ Spec Sheet

AL602ULADAJ Installation Manual


Product Reviews

Write your own review

 

Rate this product:


DWG - 800 Shames Drive , Westbury , NY 11590 , USA - 516-933-4900
Connect with us on Social Media   Facebook   Instagram   Twitter   Linked In