CX254 Nitek Modular Card Cage - Black w/ 28VAC 10Amp Power Supply - 1RU High

Modular crossover interface card cage with integrated power supply for the UTPLinks video, data & power over twisted pair transmission system.

The CX254 is a 1 RU card cage designed to hold up to five Nitek modular crossover cards for the UTPLinks system, mounted horizontally. The card cage combined with plug-in crossover cards comprises a video crossover and power insertion unit for the UTPLinks system and depending upon the type of cards used, can also include RS422 distribution and/or video transceiver capability. Three models of four-channel crossover cards are available. The cards can be used in any combination, allowing the rack system to be customized to the specific application. (Modular cards are sold separately).

The CX254, configured with plug-in cards, is designed to work with TIA/EIA standards-based structured cabling networks. The crossover card cage provides five (5) RJ45 jacks at the rear of the unit for easy interfacing with either a copper backbone cable or Nitek video receiver equipment. The integrated 24 VAC power supplies power for of each cards.

Specifications:

• Model Number - CX254
• Size - 1.72" (H) x 19.0" (W) x 15.50" (D) (with mounting ears)
• Power Requirements - 115/230 VAC, IEC with molded power cord (included)
• Twisted Pair Connection (vertical runs) - 5 RJ45 connectors providing balanced low voltage current loop
• Temperature Range - 0 degrees C to +55 degrees C
• Humidity Range - 0 to 98%, non-condensing
• Enclosure Type - Standard 19” rack 1 RU in height
• Shipping Weight - 24 lbs
• Wire Spec - 26 to 12 AWG Unshielded Twisted Pair (UTP)
• DC Loop Resistance - 51 Ohms/1,000 ft (max) (51 Ohms/300 meters)
• Normal Capacitance - 17pF/ft.
• Impedence - 100 Ohms +/- 20%
• UTP Category - 2 or better

CX254 Specifications PDF

CX254 Manual