IPCOAX1 Nitek IP Cameras over Coax 10/100/Gigabit Single Channel Surge Protector w/ Separate 12-24 Protection

The IPCOAX1 is a single channel IP Camera and PoE plus Surge Protector with an independent protection circuit for 12 or 24V power, for applications where heater units or higher power PTZ units may be required. The IPCOAX1 is an in-line, IP over Coax network surge protector for 10/100 or Gigabit network devices with a separate input for 12 or 24 VAc or DC power. The IPCOAX1 IP Ethernet over Coax Surge Protector is designed to provide surge protection for one network port. The unit has female BNC connectors at the input and output to protect the network cable and push-in terminals for the 12-24V supply. The COAX1 is ideally suited for small or restricted spaces when network protection is needed. The unit provides a heavy, single point ground connection and is easy to install in minutes. The IPCOAX1 is recommended for use with the Etherstretch™ family of products to provide IP network and PoE plus protection. The IPCOAX1 is covered by a Lifetime limited Warranty.

Specifications:

• Model Number - IPCOAX1
• Size - 0.9" H x 2.5" W x 1.8" D
• Power Requirements - None required
• Network Connection Method - Standard female BNC connectors
• Power Connection Method - Push-in terminals - rated at 5 amps
• Clamping-Data/PoE Plus/Ethernet - 58Vp-p
• Clamping-12/24V/Ac or DC - 30Vrms
• Impedance - 50 or 75 ohms
• Temperature - -40C to +85C
• Transient Response Time - 1 picosecond (typical)
• Shipping Weight - 1 lb

IPCOAX1 Specifications PDF