SAX1R Bogen Input Modules

The SAX1R module shall be a stereo, high-impedance, unbalanced input module. The module shall have two RCA jacks for its input connectors. The module shall have a gain/trim control that will allow the gain to be adjusted from -20 dB to +6 dB relative to 0 dB nominal gain. It shall have the ability to mute lower priority modules and be muted by higher priority modules. The module shall be able to assume any of 4 priority levels. It shall have a continuously variable ducking control that will enable attenuation of the input signal from a minimum of 10 dB to a maximum of 48 dB relative to the normal unmuted condition and a gradual fade back from mute when the mute or gate control is deactivated. The module shall have a VOX/gating circuit to control muting of lower priority modules and its internal gating circuit, with controls for threshold and duration. The module shall have bass and treble controls with cut or boost of 10 dB at 100 Hz and 10 kHz, respectively. The module’s outputs shall be independently assignable to each of two mixing buses. The module shall allow stereo sources to be summed and sent mono to either or both of two mixing buses.

Specifications

• Gain - -20 dB to 6 dB
• Frequency Response - +0/-3 dB, 5 Hz - 100 kHz
• S/N (20 Hz - 20 kHz) - -100 dBV
• Distortion - < 0.005%, 20 Hz - 20 kHz
• Input Impedance - 50k ohms
• Tone - ±10 dB @ 100 Hz & 10 kHz
• Ducking (level) - -10 dB to -48 dB
• Gate Threshold - 3 mV to 30 mV
• Gate Duration - 0.5s to 5s
• Priority - Four levels
• Controls - Gain, Bass, Treble, Ducking, Gate Threshold, Gate Duration
• Connector - RCA type
• Dimensions - 1-3/8" W x 3-1/8" H x 3-1/2" D
• Weight - 2.6 oz.

SAX1R Specifications PDF

SAX1R Manual