The cart is empty.
Dealers. First. Always.
DWG

WV100 Bogen Wall-Mount Power Vector 100W Modular Amplifier

SKU: WV100
  • 100-,150-, and 250-watt models, each with a large power reserve
  • Capable of handling 70V, 25V, 8-ohm, and 4-ohm speaker loads
  • 8 module bays
  • Wide selection of advanced plug-in modules
  • 2 module bays capable of handling signal processing plug-in output modules
  • 4 levels of priority between modules
  • 11-segment LED output level meter monitors the output level of the power amplifier with Peak and Average meter switch
  • Adjustable output level limiter with limit indicator
More details...
MSRP Price: $1,927.90
Save to my Wish List

DWG Dealer Price : ---


Dealers - click here to set up your dealer account today.

Existing DWG Customers - Log In to view your current dealer pricing.



Previous Item   Next Item
Product Details

Bogen's Wall-Mount Power Vector modular amplifiers offer a wide range of power from which to choose from, with three models ranging from 100W to 250W. The amplifiers are designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems.
Each model includes eight module bays for plug-in input modules and allows for up to four levels of priority between modules. Two module bays are capable of accepting signal processing plug-in output modules. Each module is controlled by an independent volume control with an associated signal/clip LED for signal status. An 11-segment LED output meter monitors output signal level.
Each model includes a motorized master volume control that can be controlled using a remote volume control panel (RVCP, sold separately).


Specifications


  • Power Output (RMS) - WV100 - 100W (140W Typical, @1 kHz/0.1%/4W)
  • Frequency Response
    • Transformer - 45 Hz to 20 kHz; 0/-2 dB @ FRP
    • Direct - 20 Hz to 20 kHz; 0/-1 dB @ FRP
  • Distortion
    • Transformer - 0.5% THD+N, Maximum, Full-rated bandwidth @ FRP
    • Direct - 0.1% THD+N, Maximum, Full-rated bandwidth @ FRP
  • Signal-to-Noise
    • Fundamental - -94 dB*
    • With Aux Module - -70 dB*
    • With Mic Module - -60 dB*
    • With Tel Module - -70 dB*
  • Tone Controls
    • Bass Frequency - 100 Hz (+/- 10 dB minimum)
    • Treble Frequency - 10 kHz (+/- 10 dB minimum)
    • Low Cut Frequency - 125 Hz @ -6 dB/octave
  • Sensitivity - 0.4V (at backplane connector)
  • Output Regulation - 2 dB or better, no load to full load
  • Output Impedance
    • Transformer-Coupled - 70V, 25V, 8 ohms; balanced or unbalanced
    • Direct Coupled - 4 ohms unbalanced
  • Tape Out
    • Output Level - 4 VRMS @ FRP
    • Output Impedance - 50 ohms maximum
  • Overload Protection - Electronic overload protection (auto reset)
  • Thermal Protection - Thermistor attached to heat sink
  • Line Fusing - Resettable circuit breaker
  • Cooling - Thermally controlled 3-speed fan
  • Power Consumption - WV100 - 2.0A @ 120V AC, 60 Hz
  • Thermal Emissions - WV100 - 495.2 BTU/hr.
  • Dimensions - WV100 - 14-1/8" W x 21" H
  • Product Weight - WV100 - 27 lb.

WV100 Specifications PDF

WV100 Installation Manual


Product Reviews

Write your own review

 

Rate this product:


DWG - 800 Shames Drive , Westbury , NY 11590 , USA - 516-933-4900
Connect with us on Social Media   Facebook   Instagram   Twitter   Linked In