FVR1001S1 Comnet Digitally Encoded Video Receiver 10-Bit SM 1 Fiber

The ComNet FVT/FVR1001 series video transmitter/ receiver supports the transmission of short-haul quality 10-bit digital video over one multimode or single mode optical fiber. This module is universally compatible with major CCTV camera manufacturers. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. Packaged in the exclusive ComNet ComFit housing, these units may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.

Specifications

Video

• Video Input - 1 volt pk-pk (75 ohms)
• Overload - >1.5V pk-pk
• Bandwidth (minimum) - 5 Hz - 10 MHz
• Differential Gain - <2%
• Differential Phase - <0.7˚
• Tilt - <1%
• Signal-to-Noise Ratio (SNR) - >67 dB @ Maximum Optical Loss Budget
• Max. RG-59 COAX Distance - 100m (300ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth
• Wavelength - 1310 nm, Multimode & Single Mode
• Numver of Fibers - 1

Led Indicators

• Optical - Video - Power

Connectors

• Optical - ST
• Power - Terminal Block
• Video - BNC (Gold Plated Center-Pin)

Electrical & Mechanical

• Power Surface Mount - 8-15 VDC @ 2W
• Rack Mount - From Rack
• Number of Rack Slots - 1
• Current Protection - Automatic Resettable Solid-State Current Limiters
• Circuit Board - Meets IPC Standard
• Size (in./cm) (L×W×H) - 6.1 × 5.3 × 1.1 in., (15.5 × 13.5 × 2.8 cm)
• Shipping Weight - <2 lb./0.9 kg

Environmental

• MTBF - >100,000 hours
• Operating Temp - -40˚ C to +75˚ C
• Storage Temp - -40˚ C to +85˚ C
• Relative Humidity - 0% to 95% (non-condensing)

FVR1001S1 Specifications PDF

FVR1001S1 Manual