The cart is empty.
Dealers. First. Always.
DWG

FVR20C2S2 Comnet Digitally Encoded Video Receiver and Contact Closure, 10-Bit, sm, 1 fiber

SKU: FVR20C2S2
  • 10-bit Digital Video, Contact Closure Transmission: Receives one or two real-time color video signals over two optical fibers
  • Contact Closure
  • Supports loopback for fiber link testing
  • Exceptionally low video distortion with zero performance variation vs. optical path
  • Compatible with all NTSC, PAL, or SECAM CCTV camera systems
  • NTCIP compatible
  • Designed to meet NEMA TS 1/TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
  • Voltage transient protection on all power and signal input/ output lines provides unconditional protection from power surges and other voltage transient events.
More details...
MSRP Price: $1,050.00
Online Price: $853.00
Save to my Wish List

DWG Dealer Price : ---


Dealers - click here to set up your dealer account today.

Existing DWG Customers - Log In to view your current dealer pricing.



Previous Item   Next Item
Product Details

The ComNet FVR10C1(M,S)1 and FVR20C2(M,S)2 series dual-channel video receivers support the transmission of one or two independent short-haul quality 10-bit digital video signals and one or two contact closures in the direction of the video over two multimode or single mode optical fibers. This module is universally compatible with major CCTV camera manufacturers. It is compatible with the FVT10C1(M,S)1/M series single channel transmitters. Plugand- play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly confirming operating status. These units may be either wall or rack-mounted.


Specifications


Video

  • Video Input - 1 volt pk-pk (75 ohms)
  • Overload - >1.5V pk-pk
  • Bandwidth - 5 Hz - 10 MHz
  • Differential Gain - <2%
  • Differential Phase - <0.7º
  • Tilt - <1%
  • Signal-to-Noise Ratio SNR) - >60 dB typical @ Max. Optical Loss Budget
  • Max. RG-59 COAX - 100m (300ft) Camera to Fiber Optic Module to maintain bandwidth

Contact

  • Interface Response time - 0.5msec
  • Input - Dry Contact Closure
  • Output - SPST Relay, 0.5A Contact Rating - normally open
  • Wavelength - 1550/1310 nm, MM and SM
  • Optical Emitter - Laser Diode
  • Number of Fibers - 1 or 2

LED Indicators

  • Video - Link

Connectors

  • Optical - ST
  • Power - Terminal Block
  • Video - BNC
  • Contact - Terminal Block

Electrical & Mechanical

  • Power Surface Mount - 8 – 15VDC @ 2W
  • Current Protection - Automatic Resettable Solid-State Current Limiters
  • Circuit Board - Meets IPC Standard
  • Size (in./cm) (L×W×H) - 6.1 × 5.3 × 1.1 in. (15.5 × 13.5 × 2.8 cm)
  • Shipping Weight - 2 lb./0.9 kg

Environmental

  • MTBF - >100,000 hours
  • Operating Temp - -40˚ C to +75˚ C
  • Storage Temp - -40˚ C to +85˚ C
  • Relative Humidity - 0% to 95% (non-condensing)

FVR20C2S2 Specifications PDF

FVR20C2S2 Manual


Product Reviews

Write your own review

 

Rate this product:


DWG - 800 Shames Drive , Westbury , NY 11590 , USA - 516-933-4900
Connect with us on Social Media   Facebook   Instagram   Twitter   Linked In