FVT1031M1-P Comnet Digitally Encoded Video Transmitter/ Data Transceiver for Pelco Spectra Series MM 1 fiber

The ComNet FVT1031/P series video transmitter, along with the ComNet FVR1031 series receiver, supports simultaneous broadcast-quality video transmission of 10-bit digital video and bi-directional RS422 data over one multimode or single mode optical fiber. The FVT1031/P is designed to plug directly into the Pelco Spectra III/IV dome, and connects with power, video input and two way data via the Pelco electrical connector.

Specifications

Video

• Video Input - 1 volt pk-pk (75 ohms)
• Overload - >1.5V pk-pk
• Bandwidth - 5 Hz - 6.5 MHz
• Differential Gain - <2%
• Differential Phase - <0.7°
• Tilt - <1%
• Signal-to-Noise Ratio (SNR) - 67 dB @ Maximum Optical Loss Budget
• Max. RG-59 COAX Distance - 100m (300ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth

Data

• Data Format - RS-422
• Data Rate - DC-115 Kbps (NRZ)
• Wavelength - 1310/1550 nm, MM and SM
• Number of Fibers - 1
• Optical Emitter - Laser Diode

Connectors

• Optical - ST

Electrical & Mechanical

• Power - 8-15 VDC, 80 mA from Dome
• Current Protection - Automatic Resettable Solid-State Current Limiters
• Circuit Board - Meets IPC Standard
• Size (in./cm) (LxWxH) - 4.0 x 2.5 in., (10.16 x 6.4 cm)
• Shipping Weight - <0.5 lb./0.225 kg

Environmental

• MTBF - >100,000 hours
• Operating Temp - -40° C to +75° C
• Storage Temp - -40° C to +85° C
• Relative Humidity - 0% to 95% (non-condensing)

FVT1031M1-P Specifications PDF

FVT1031M1-P Manual